I was looking to purchase some oem brembos when I came across this:

http://www.ebay.com/itm/Big-Brake-Ki...87d3d7&vxp=mtr

It uses the stock 2006 rotors so I could run a stoptech front and rear rotor kit. I've done alittle research but no real reviews of it. I know its not a factory wilwood kit but it seems like a cheap alternative. Just trying to see what you guys think about it.

 

Just buy a factory set of brembos for that. That way everything is OEM and you can find replacement parts easily

 

Just my suggestion....

 

Quick question for you guys, I'm buying this z tube off kijiji but it doesn't look like the traditional z tube. He said it's from an 07 350z. Question is: will these work? I have an 04 g35 sedan.

Here's the z tube in question:

http://a3.sphotos.ak.fbcdn.net/hphot...20242339_o.jpg

 

Almost positive that won't fit the first gen sedan

 

Reall eh? I thought there's only one kind of z tube. I mean the OEM from 350z

 

Those are from an HR motor with two throttle bodies. You have a DE (single throttle body)

This is what you need:

http://auto.badtziscool.com/wp-conte...icture-002.jpg

You can get Stillen's Ztube or an OEM for your 1st gen.

 

hey everyone, im looking to replace my oem air intake for some aftermarket ones. I got an 03 G sedan (doggy door) and I have no clue where to start. Any suggestions for this mod? Whats the ideal setup for this?

 

the only suggestion I have is if you're going to go with a new intake at least get a full CAI, meaning it snakes all the to the front of the car, a lot of people do short ram with no heat shield and suck in hot engine air. sooo either Z-tube/pop charger(w/ heat shield) combo or a full CAI. from what I hear, the OEM box with a K&N drop in and a Z-Tube is a pretty legit combo as well...

 

To be honest would have just kept my oem but when i bought the car the oem box was missing a component and right now the box is open and its not concealed. So i figured might as well go with aftermarket. I was thinking with the whole short ram with heat shield, z-tube/pop charger but im not sure which brand is prefer for the G

 

https://g35driver.com/forums/intake-...s-results.html

 

ooooh yes, VERY good read, cant believe i forgot about that thread...

 

If you go with a short ram that has a built in MAF opening, be sure to get one that has the "round" opening (specific to doggy door model years). I don't know when this actually changed over (maybe 03.5?) but all others have the rectangular MAF opening.

For reference

Round MAF


Rectangular MAF

 

^^ thanks for the heads up, ill look into that when im deciding what to buy.

 

Difference between my (or any) 03 coupe endlinks and 08 nismo endlinks? They look to be the same but i hear they're beefier