If it's a 6mt, it came with a 3.5 vlsd. Rev ups are more prone to OC issues, have it checked out before you buy it. 9 grand is a lot for a G with that many mile, cars probably worth $7500.00

 

i currently have 19x10.5 22offset rear with fenders rolled
245/35/19 tires Nexen N3000

Now i wanna do 19x11 22 offset any inputs? and what size tires?

Thanks Guys

 

I know these are old posts but this is really good information to know for those who have belt driven fans.

"Most cars that have an engine-driven cooling fan have a thermostatically controlled viscous clutch -- the temperature of the fluid actually drives the clutch. This clutch is positioned at the hub of the fan, in the airflow coming through the radiator. This type of clutch is a lot like the viscous coupling sometimes found in all-wheel drive cars. The fluid in the clutch gets thicker as it heats up, causing the fan to spin faster to catch up with the engine rotation. When the car is cold, the fluid in the clutch remains cold and the fan spins slowly, allowing the engine to quickly warm up to its proper operating temperature."

This would explain why my fan is louder at times.

 

Anyone with a G35x here?? Have you guys changed your front hub assembly? Where did you guys order it from? And how much did you guys pay? It should be the same for 2003-2006 I think. I have a 2005 g35x. I work at PartSource but I can't order it anywhere lolz. I found them at ebay for $200 plus $90 for shipping each. And I want to replace both sides. I just want to know if that's the oy option I have.

Thanks in advance.

 

Alright so how come every G I've seen has a dull passenger side headlight. I know they yellow I've been fighting it constantly and plan on new lights and lenses, but for real every G I've seen the passenger side lens is way worse ten the driver. This can't be coincidence.

 

my driver side was more yellow when I first got it so apparently its not all of em.

 

So my driver's side HID low beam went out tonight....had gone out months ago but just for a little while, but seems like it might have died for good this time...what would you guys recommend? Buying the replacement kit from Diode Dynamics maybe? Is there a good way to diagnose exactly which part is broken? Thanks

 

does it make a difference whether you have use a plastic intake tubing, like the z-tube, vs the z1 aluminum intake tubing??

 

plastic is preferable. absorbs less heat, gives you a slightly lower IAT. Alum is shiny and a lot of people like shiny. depends on whether you want show or go.

 

Thats what i was thinking. Good looks

 

Has anyone tried this?

http://www.twmperformance.com/pedalbox/index.htm

 

I'm thinking of getting these headlights for my o3 sedan: eBay Headlights but I have Xenon HID's and I'm not sure if these will fit them. At the bottom it says non Xenon sedans, but when I looked for a xenon equivalent, they offer the same housing but with an HID kit. I would rather not swap out my OEM HID's for some eBay kit I've never heard of, so my questions is, would these work with my Xenon's and are housings dependent on the type of bulb or is that JUST the ballast's?

 

hey guys is it illegal to take out that square thing in my coupe midpipe and make it one whole straight pipe?

 

^Its only a resonator so I doubt it

 

will it make my car louder?