problem with Brake install (broke bolt)
#1
problem with Brake install (broke bolt)
As I was reinstalling the caliper I broke one of the bolts off inside of the caliper.
I am going to see If I can have one of the guys at work drill it out. If that works can I just buy a new bolt from home depot or autozone? Or do I have to go to infiniti
If that doesn work I guess i am in for a new caliper.
I am going to see If I can have one of the guys at work drill it out. If that works can I just buy a new bolt from home depot or autozone? Or do I have to go to infiniti
If that doesn work I guess i am in for a new caliper.
#2
#3
If you know the specs, you can buy a new bolt. It's prob a grade 10.9 bolt (roughly equivalent to grade 8 SAE) , and those aren't common home depot. Might have to order from somewhere like mcmaster-Carr but by the time you pay shipping, might as well go to Infiniti/Nissan and get one.
Dealership bolts are of better quality than parts store bolts though. They are usually held to tighter standards for fasterers used on automobiles while parts store bolts don't need to meet.
Dealership bolts are of better quality than parts store bolts though. They are usually held to tighter standards for fasterers used on automobiles while parts store bolts don't need to meet.
#5
#7
Will check a couple of local hardware stores tomorrow morning, like ace hardware. You were right, HD and lowes dont have anything close to this.
Hopefully the guys at work will be able to get the broken pin out tomorrow. ****, we make pins for air planes so I might even be able to find the right bolt...
Lesson learned, I need a torque wrench.....
Hopefully the guys at work will be able to get the broken pin out tomorrow. ****, we make pins for air planes so I might even be able to find the right bolt...
Lesson learned, I need a torque wrench.....
Trending Topics
#8
#10
allright, we are all good now. Took the part to work and they were able to get the broken bolt out for me without damaging the grooves. Went to autozone and they had the bolts for $7.99. they said they were for the brembo brakes but the bolts were the exact same.
Thanks for everyones helps
Thanks for everyones helps
Thread
Thread Starter
Forum
Replies
Last Post
kinetek
Brakes & Suspension
9
08-03-2015 04:25 PM
Crappyday
Brakes & Suspension
1
07-28-2015 04:07 PM