Are you a G35 Sedan owner in So Cal? Please read! We need a test car for R&D of new 93db exhaust system

more info:
http://www.tanabe-usa.com/exhausts/medaliontouring.asp

sound clip:
http://www.tanabe-usa.com/soundclips.asp

Participants of exhaust test fitment should be in SoCal, and the vehicle's engine/power/exhaust must be in stock condition!

If interested, please contact us as soon as possible! Participants are eligible to keep the finished product.

TEL: 310-783-0200

Tanabe Racing Development USA
1849 Western Way
Torrance, CA 90501
http://www.tanabe-usa.com

 

hm.... is aftermarket fujitsubo exhaust with TANABE Y PIPE, CF intake and ECU stock enough? cause your going to take off the exhaust so all i have more is an intake and ECU.

My car will be ready for test fitment after next monday.

I live in Torrance!!

Ed lin

 

I wished I lived near Torrance. I am out in the OC, any possibilities of fitment near my location, if so count me in.

 

Man i wish i lived in cali

 

when do you need the car? and for how long?

 

Me me...just FUJI Exhaust, Y-pipe and Z tube :-)

 

Let me know when, where, and how long you need it for... all i have is the coupe middy so its pretty much bone stock.
-GP-

 

my exhaust and intake is bone stock. i live in irvine.

let me know!

thanks

 

I am definately up for this too... will call tomorrow -- I spend 50% of my time in so cal these days... cause all my customers are down there!

 

The car will need to be bone stock, as we need to take baseline dyno runs so that we can compare stock and with-exhaust results, and make any modifications necessary so the system will make good power as a y-pipe back alone.

G35Lin> How are you enjoying the Tanabe Y-Pipe?

As most of you know, Y-pipes are fairly necessary to create big power, since the stock ones are very restrictive, but we're going to shoot for good power from a y-pipe back

Cars will be needed for a maximum of 1.5 days, but typically R&D may take much less time, in which we will call you to let you know the results!

Tanabe Racing Development USA

 

Exhaust sounds nice, but I would like more info on the Sustec Pro SEVEN/TEAS combo for the G35...

 

my car is complete stock, i called and the guy who picked up had no idea what i was talking about. i have an 05 blk sedan 5at

 

heheh i LOVE my Y pipe!!!!!

Now i need the rear of it!! wana give me a sponsorship??? :P

Ed Lin

 

I'd have to say the masses disagree with the statement that the OEM Y-pipe is a major restriction because the 350Z crowd reports that the aftermarket y-pipeS (Jic, Tanabe, others) do absolutely nothing for their dynos or 1/4 mile times. Some G owners report slower off the line acceleration too which isn't good for those of us stuck with autos and a limited launch rpm. I agree that the OEM y-pipe is very ugly, but the data seems to show that the stock y-pipe can flow enough air for the NA VQ35. It seems that the only way to gain any real power with an exhaust on these cars to go with a true dual setup like $700+ Stillen and Borla offer. Even then, it's only worth about a dyno verified 7-9whp.

 

hm.... i actually felt a lower end boost when i got my Y pipe. But i guess thats just my butt dyno tho...

I went with the tanabe just to be different and cause it looked like a very nicely designed Y pipe. A little different from the others. it doesn't give me an raspy sound like the first gen fujitsubo Y pipe did.

Ed Lin