will the m45s shift knob fit on the 07 g35s
Originally Posted by Lucky_One
is it possible to intergrate this M45 shift **** to 07G? and does it come in black?
i like this one better than the stiched one. thanks
i like this one better than the stiched one. thanks
Yes, the M **** is available 3 different ways and will fit on any G with the automatic shift boot type...
This color, Solid Black w/ Black stitching, and Black w/ White Stitching (sport ****).
Just a re-minder so do not have to go searching back into the thread:
Pricing!
Forum Member pricing for the Y50 Sport Shift ****!
Outside of California: $92.50
Inside of California: $99.31 (including Tax)
For all black or willow color, PM me zip...
Pricing!
Forum Member pricing for the Y50 Sport Shift ****!
Outside of California: $92.50
Inside of California: $99.31 (including Tax)
For all black or willow color, PM me zip...
Shortened My lever Today
Registered User
Joined: Jul 2007
Posts: 43
Likes: 1
I had to increase the 2 solts down the front and back side of the shifter, then cut the outer lever to the desired length.
Once the outside was short I worked on the inside. You can pull the white top off the metal pole.
For the inner pole that controls the shifting I cut it down to length.
After the shaft was close I worked on the white piece. I cut the bottom clip off and then shortened the top section. Took a lot of fitting to get both the center pole and the white piece to the proper lengths for perfect function. Used some hot glue to reconnect the clip and the top of the white piece.
Still need to go get some lube for the shaft and the white tip.
Once the outside was short I worked on the inside. You can pull the white top off the metal pole.
For the inner pole that controls the shifting I cut it down to length.
After the shaft was close I worked on the white piece. I cut the bottom clip off and then shortened the top section. Took a lot of fitting to get both the center pole and the white piece to the proper lengths for perfect function. Used some hot glue to reconnect the clip and the top of the white piece.
Still need to go get some lube for the shaft and the white tip.
Registered User
Joined: Jul 2007
Posts: 43
Likes: 1
Jason,
Don't bother cutting open a ****, they will not be able to be modified to sit lower. Heres a couple of pics of my **** (that doesn't sound right, LOL)
If you want to take a look inside one just stick a small flat head into the top side of the button, it pops right out.
Don't bother cutting open a ****, they will not be able to be modified to sit lower. Heres a couple of pics of my **** (that doesn't sound right, LOL)
If you want to take a look inside one just stick a small flat head into the top side of the button, it pops right out.
Joined: Nov 2003
Posts: 30,233
Likes: 175
From: Rothesay, New Brunswick, Canada
Originally Posted by G35s-Dude
Can't find it in the DIY section 
.
.
What about 6mt?
Now that I see this shifter, I want one for the manual...
I think that perforated black leather w/white stitching is looking great.
Anyone see shifters for manuals that look like this?
He2
I think that perforated black leather w/white stitching is looking great.
Anyone see shifters for manuals that look like this?
He2
.