Parting everything out.
#1
Parting everything out.
It's been 3.5 years since I purchased my G, and 2.5 years since I started to mod it. I'm selling my G for my school and some others.... so I guess I'm parting everything out.
It's been a great forum and definitely the best people around that I got to know. I wish everyone good luck with the G's and.... keep modding!!
For people who's wondering what I'm parting out:
1. Hokichis Anti-Sway Bars
2. GT-Spec Front 2PC Tie Bars
3. GT-Spec Rear Sub-Chassis Bar
4. GT-Spec Front Tower Strut Bar (with RareJDM Etched and Matte Black painted brackets)
5. Takeda Short Ram Intakes with Polished JWT Pop-charger heat shield
6. ARC Oil Catch/Overflow Combo can with custom brackets and polished + Samco Black Hoses + Earl's Hose Fittings (Clamps)
7. ARC Radiator Cap
8. ARC Oil Cap (Green Top to match the catch can)
9. SxExCx Power Steering Polished Can with Custom made brackets for HR/VHR motors. (Not shown)
10. Shaved and painted (blueslate) battery cover (Swap+cash with untouched OEM only)
11. Shaved and painted (blueslate) brake fluid cover (Swap+cash with untouched OEM only)
12. Painted (blueslate) Engine Cover (Swap+cash with untouched OEM only)
13. Shaved and Painted (blueslate) Radiator Cover (Swap+cash with untouched OEM only)
14. Emblemless grill painted in matte black (Swap+cash with untouched OEM only)
15. Journey/base front lip (blueslate)
16. RavSpec roof wing (blueslate)
17. Tommy Kaira trunk wing (blueslate) needs work for perfect fitment.
18. MXP Quad-tipped Y-pipe back exhaust
19. MXP Y-pipe (60mm)
20. Custom made diffuser (matte black, perfect for MXP exhaust)
21. HKS Hipermax 3 coilovers
22. Apex'i S1 dampers
23. Volk Racing License plate
24. Volk Racing GT-30 Phantom Edition (limited/discontinued) 9.5x20 +35 10.5x20 +37 (Just refinished and never mounted, looks brand new!)
25. Akebono BBKs
I think that's about it.
Listing #6 with catch can is a combo set because the hose is slightly modified (only the dumper) for the catch can and the fittings work perfectly. The catch can side has never been hooked up. Only overflow portion has been used.
Listing #9 PS Can is still under work my my friend and should be done by next week.
It is recommended to purchase all three #18, #19, and #20 together as they were all made for each other.
I have both HKS and Apex'i coilovers (#21 and #22). If you want more street type coil over HKS can't be beat. They're VERY comfortable coils. It has less than 5000 miles on them. If you want some super stiff, but also SUPER smooth coilovers Apex'i is the way to go . I love the Apex'i ones. More so than the JIC! It's stiff when it needs to be and super smooth the rest of the times on freeway. Man... so perfect. Only problem with the Apex'i coilovers is that you'd have to cut a hole on the top of the rear strut mount. This coilover was first designed by the 370Z's and the damping adjusting **** is slightly taller than the other coilovers, resulting in not fitting correctly without the cut out. Here are a couple of pictures where you can see I cut the holes out.
Anyways, thanks again to everyone their support and help. It's been a great pleasure to be a part of something truly great.
See you guys later!
PS, please DON'T leave a comment asking about pricing, this thread will get deleted!!!!. Instead, visit this link for sales thread :
https://g35driver.com/forums/marketp...-part-out.html
It's been a great forum and definitely the best people around that I got to know. I wish everyone good luck with the G's and.... keep modding!!
For people who's wondering what I'm parting out:
1. Hokichis Anti-Sway Bars
2. GT-Spec Front 2PC Tie Bars
3. GT-Spec Rear Sub-Chassis Bar
4. GT-Spec Front Tower Strut Bar (with RareJDM Etched and Matte Black painted brackets)
5. Takeda Short Ram Intakes with Polished JWT Pop-charger heat shield
6. ARC Oil Catch/Overflow Combo can with custom brackets and polished + Samco Black Hoses + Earl's Hose Fittings (Clamps)
7. ARC Radiator Cap
8. ARC Oil Cap (Green Top to match the catch can)
9. SxExCx Power Steering Polished Can with Custom made brackets for HR/VHR motors. (Not shown)
10. Shaved and painted (blueslate) battery cover (Swap+cash with untouched OEM only)
11. Shaved and painted (blueslate) brake fluid cover (Swap+cash with untouched OEM only)
12. Painted (blueslate) Engine Cover (Swap+cash with untouched OEM only)
13. Shaved and Painted (blueslate) Radiator Cover (Swap+cash with untouched OEM only)
14. Emblemless grill painted in matte black (Swap+cash with untouched OEM only)
15. Journey/base front lip (blueslate)
16. RavSpec roof wing (blueslate)
17. Tommy Kaira trunk wing (blueslate) needs work for perfect fitment.
18. MXP Quad-tipped Y-pipe back exhaust
19. MXP Y-pipe (60mm)
20. Custom made diffuser (matte black, perfect for MXP exhaust)
21. HKS Hipermax 3 coilovers
22. Apex'i S1 dampers
23. Volk Racing License plate
24. Volk Racing GT-30 Phantom Edition (limited/discontinued) 9.5x20 +35 10.5x20 +37 (Just refinished and never mounted, looks brand new!)
25. Akebono BBKs
I think that's about it.
Listing #6 with catch can is a combo set because the hose is slightly modified (only the dumper) for the catch can and the fittings work perfectly. The catch can side has never been hooked up. Only overflow portion has been used.
Listing #9 PS Can is still under work my my friend and should be done by next week.
It is recommended to purchase all three #18, #19, and #20 together as they were all made for each other.
I have both HKS and Apex'i coilovers (#21 and #22). If you want more street type coil over HKS can't be beat. They're VERY comfortable coils. It has less than 5000 miles on them. If you want some super stiff, but also SUPER smooth coilovers Apex'i is the way to go . I love the Apex'i ones. More so than the JIC! It's stiff when it needs to be and super smooth the rest of the times on freeway. Man... so perfect. Only problem with the Apex'i coilovers is that you'd have to cut a hole on the top of the rear strut mount. This coilover was first designed by the 370Z's and the damping adjusting **** is slightly taller than the other coilovers, resulting in not fitting correctly without the cut out. Here are a couple of pictures where you can see I cut the holes out.
Anyways, thanks again to everyone their support and help. It's been a great pleasure to be a part of something truly great.
See you guys later!
PS, please DON'T leave a comment asking about pricing, this thread will get deleted!!!!. Instead, visit this link for sales thread :
https://g35driver.com/forums/marketp...-part-out.html
#2
#3
Just going to buy a beater with the money I get from selling these parts. I might end up getting another S2000 in a year or two... or a used CR-Z in a year or so. Not completely set my mind yet.
As for clear reflector, my friend cut off a part of fluorescent light panel and glued it on. It came out pretty clean.
As for clear reflector, my friend cut off a part of fluorescent light panel and glued it on. It came out pretty clean.
#5
#7
Trending Topics
#10
Dibs on GT-Spec Rear Sub-Chassis Bar if its this one
http://www.gtspec.com/product/gtspec...ace-350zg35g37
PM the price.
Thanks!
http://www.gtspec.com/product/gtspec...ace-350zg35g37
PM the price.
Thanks!
#15