General Tech Questions This Forum is Only for Questions and Posts that Do Not fit under the other Tech categories.(No Classified Posts)

Pls don't die

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 31, 2018 | 01:20 AM
  #1  
RA122223's Avatar
Thread Starter
|
Banned
Joined: Nov 2017
Posts: 6
Likes: 0
Pls don't die

The title is pretty much what I pray every time I throw my car into neutral or step on the clutch after moving. I just changed out my steering wheel so of course I had to pull the battery so the air bag won't blow up in my face lol but after doing so, my car will sometimes die when I come to a stop. It doesn't always happen and sometimes my car catches itself at around 300-500 RMP and then goes back to normal but other times, it will just drop and die. I tried doing my closed throttle body relearn, idle relearn, and accelerator position relearn to no success. Just wondering if anyone else had any ideas on what to try next? She idles fine when I start her up, its just after driving and putting it in neutral is when it drops really low. Any help would be greatly appreciated! Thanks all!
 
Reply
Old Jan 31, 2018 | 02:18 PM
  #2  
cleric670's Avatar
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
Premier Member

ECU reset as well, check for obvious vacuum leaks, check for a stuck open pcv valve.

Perform the idle air reset AGAIN after the ECU reset. Make sure the engine is up to operating temp before you do the idle reset or I guarantee it won't work properly.
 
Reply
Old Feb 2, 2018 | 09:49 PM
  #3  
RA122223's Avatar
Thread Starter
|
Banned
Joined: Nov 2017
Posts: 6
Likes: 0
Originally Posted by cleric670@gmail
ECU reset as well, check for obvious vacuum leaks, check for a stuck open pcv valve.

Perform the idle air reset AGAIN after the ECU reset. Make sure the engine is up to operating temp before you do the idle reset or I guarantee it won't work properly.
Thanks, I'll try this asap and let you know how it goes!
 
Reply
Old May 22, 2020 | 06:40 PM
  #4  
Eric12312343's Avatar
Registered User
Joined: Nov 2019
Posts: 9
Likes: 0
2005 g35 with a k and n CAI and nvidia exhaust
I just looked for some vacuum leaks and there was one of the hoses that was loose, I am using high pressure lines, after I tightened the line and did a idle relearn and ECU reset my car no longer has shutoff, so hopefully I fixed it. Thanks guys
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chrisbk
G35 Sedan V36 2007- 08
12
Apr 21, 2020 07:27 PM
MADtotheA
G35 Coupe V35 2003 - 07
14
Jun 16, 2011 04:21 PM
Maciuniu
G35 Coupe V35 2003 - 07
3
Jun 5, 2011 10:10 AM
Tollboothwilley
Engine, Drivetrain & Forced-Induction
12
Feb 26, 2009 01:13 AM
1fastsedan
G35 Sedan V35 2003-06
12
Sep 8, 2006 12:24 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:56 PM.