hey can someone tell me exactly which nuts and bolts i need to install a 5/16 MD spacer..i need to know how many bolts and what sizes and if they are all the same size basically im about to get one thats just the spacer and gasket and i need to know what else i need for install thanks...

 

you should be able to use all the original bolts.

 

its on their site with the instruction manual pdf i think

 

i dont have any of the bolts or the nuts thats why i need the sizes and to know how many so ill know which ones to buy i guess from home depot or somewhere anybody know...on the site it doesnt list the size of the washers bolts....

 

It will come with bolts and washers....all the bolts are longer than the factory ones so motordyne has to replace them...

 

If you ordered it from Motordyne, he should have sent you the bolts with it. The replacement bolts that he sends out with it are actually longer than the ones that come with your plenum because they need to extend through the spacer now too while on their way into the top of the motor.

If you didn't get the bolts with your spacer, I'd send Tony a message and he'll surely send you a new package of the bolts.

 

Sorry but this is not true best bet is to order from MD.

 

Both Partyman and Nismo G hit it for you. No worries. Everything you need except the tools will be there.

 

the thing is im buying it used from somebody and they only have the gasket and the spacer so i need to know what i need to go buy to install it like i need to know what size bolts washers and how many.. if anybody can help me with that id appreciate it

 

there are:

4, 70mm hex cap bolts
3, 55mm hex cap bolts
11, 35mm hex cap bolts

18 bolts total....all with a 10mm cap

 

dont forget to put the loctite on the 6 center bolts!

 

You can download the instructions from the motordyne website. I believe it includes the parts list.