MREV+ installed on a NON REVUP engine!
Originally Posted by codeflux
Tony noted that the next batch will be available at the beginning of June.
Registered User
iTrader: (1)
Joined: Jan 2004
Posts: 2,295
Likes: 1
From: So.Cal. - Hacienda Hts. 626
Originally Posted by dovla
Why not? Unless you have some kind of spacer already, adding $122+ MREV2 (skip the 5/16" spacer - dont needed with MREV2) is as good as it gets - best bung for the buck.
Even if you make, very unlikely, as little as 7 WHP you will spend ~$17 per WHP.
And if you make 12+ WHP you will spend ~$10 per WHP. Not even N2O can beat this.
Even if you make, very unlikely, as little as 7 WHP you will spend ~$17 per WHP.
And if you make 12+ WHP you will spend ~$10 per WHP. Not even N2O can beat this.
What's the estimated time of installation on the MREV2? Time for me is going to be limited for me the next few weeks, just trying to find a good time to schedule this mod.
Registered User
iTrader: (1)
Joined: Jan 2004
Posts: 2,295
Likes: 1
From: So.Cal. - Hacienda Hts. 626
Originally Posted by TonyZ_G
you can use the mrev v2 with the 5/16 spacer.
Registered User
Joined: Apr 2006
Posts: 65
Likes: 0
So I just finished reading this whole thread, spent 30 minutes doing so, and yet I still do not know what I can to to my 06 AT Coupe.
Can someone please tell me if the MREV works for the 06 AT, or do I just get the spacer?
Can someone please tell me if the MREV works for the 06 AT, or do I just get the spacer?
Originally Posted by mikesj
Tony just posted the dyno of mrev2 + 5/16" spacer on REVUP engine which is your car. The dyno tells you the story. The first top two curves
are mrev2+spacer and bottom three curves are stock
Mike
are mrev2+spacer and bottom three curves are stock
Mike
So, if this plot is on the REVUP, and this thread is about NON-Revup - what's the differnce causing this dyno to look so much better? Did this REVUP have any other mods, and was it "Tuned" in any way before the MREV-2 was added? Should we expect same result on NON-Revup?
Joined: Jul 2004
Posts: 3,054
Likes: 85
From: Los Angeles California
Test was performed on a 350Z with Nismo exhaust and Pop charger. Nothing else.
Also, results between the nonrevup and the revup will never be the same.
The revup takes to this mod much better because the REVUP starts with a completely different plenum.
Also, results between the nonrevup and the revup will never be the same.
The revup takes to this mod much better because the REVUP starts with a completely different plenum.
Originally Posted by Hydrazine
Test was performed on a 350Z with Nismo exhaust and Pop charger. Nothing else.
Also, results between the nonrevup and the revup will never be the same.
The revup takes to this mod much better because the REVUP starts with a completely different plenum.
Also, results between the nonrevup and the revup will never be the same.
The revup takes to this mod much better because the REVUP starts with a completely different plenum.