For those of you upgrade to 06 tail lights...
#78
#79
#80
![7](https://g35driver.com/forums/images/smilies/7.gif)
#81
I got the pinouts for my relays and for the ones the one that elrooko used so I know what goes where.
Oh yea, one thing to add is these relays are latching relays. So any 12v 10pin DPDT dual coil latching relay will work for this.
Looking at the pinouts make it look much simpler than it really is.
Oh yea, one thing to add is these relays are latching relays. So any 12v 10pin DPDT dual coil latching relay will work for this.
Looking at the pinouts make it look much simpler than it really is.
#83
I've been re-reading over both nameless's and elrooko's writeups.
I like the simplicity of nameless's. The main problem is we do not have this Mitsubishi module.
I've been digging thru the FSM and I finally found the wires that go to the fuel lid (FSM terms in case you are looking for gas door or fuel door).
I'm gonna see what I can do with this, and also where I will be placing the relay.
I like the simplicity of nameless's. The main problem is we do not have this Mitsubishi module.
I've been digging thru the FSM and I finally found the wires that go to the fuel lid (FSM terms in case you are looking for gas door or fuel door).
I'm gonna see what I can do with this, and also where I will be placing the relay.
#84
i did it the way elrooko did and it was easier than it seems. 2 wires to the button on the lights, 2 wire to the trunk release in the car, 2 wire for lock/unlock and the 2 grounds, and thats it. oh hey, you might be able to check it out if you want, i will be getting my door lock fixed soon.
#87
#88
Registered User
iTrader: (10)
#89
#90
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)