Installed clear Bra today but have question
#1
Installed clear Bra today but have question
I have Clear Bra installed on my new G35xS today.
I am not sure whether the installer done the job properly
Right after the installation I drove home through some nasty rain and snow. After I got home, I cleaned the front end of the car to check the installation again. What I found is a lot of dirt is collected in one spot(pic 1), which I will ask the installer to look at it. There are few spots that the edge of the bra doesn’t stick all the way to the paint (pics 2 and 3). I am wondering whether it is normal? I like to know whether other owners have the same problem?
I am not sure whether the installer done the job properly
Right after the installation I drove home through some nasty rain and snow. After I got home, I cleaned the front end of the car to check the installation again. What I found is a lot of dirt is collected in one spot(pic 1), which I will ask the installer to look at it. There are few spots that the edge of the bra doesn’t stick all the way to the paint (pics 2 and 3). I am wondering whether it is normal? I like to know whether other owners have the same problem?
#2
Registered User
iTrader: (2)
Join Date: Feb 2007
Location: Huntersville, NC
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
It is most likely due to the conditions you drove in after the install coupled with the bra not fully adhering to your car. When I had mine installed the guy told me to avoid washing the car for a few days since any water could potentially get under the film and cause the bra not to stick. I also had to work out a few bubbles near the edges over the first day or so, but other than that I have had no issues with mine.
You may want to have your installer look at that.
You may want to have your installer look at that.
#4
Originally Posted by shawnost
It is most likely due to the conditions you drove in after the install coupled with the bra not fully adhering to your car. When I had mine installed the guy told me to avoid washing the car for a few days since any water could potentially get under the film and cause the bra not to stick. I also had to work out a few bubbles near the edges over the first day or so, but other than that I have had no issues with mine.
You may want to have your installer look at that.
You may want to have your installer look at that.
My installer actually told me to wash the car as soon as I get home, and
wax the clear bra with turtle wax.
#5
#6
#7
I had a clear bra installed on my G...
Originally Posted by ksoto
Thanks for the info
My installer actually told me to wash the car as soon as I get home, and
wax the clear bra with turtle wax.
My installer actually told me to wash the car as soon as I get home, and
wax the clear bra with turtle wax.
I was told to not use any carnauba wax on the bra at all because it can cause discoloration. So I've only used the Klasse twins on the bra.
Trending Topics
#9
Originally Posted by Dephect
like what everyone else said, most likely the installer will slice off the dirt edge with an x-acto blade. you'll be fine after that.
#12
#14
Same here, about $700 for the same coverage. If you are in NorCal I suggest www.invisi-bra.com (uses ventureshield product). He's the same guy that does the clear bras for Infiniti of Elk Grove (gave me the same coverage that Infiniti of Elk Grove offered at the time of purchase but for half the price).
As for cleaning and maintaining it, I ordered PLEXUS off of detailedimage.com. This is the stuff the installer recommended for keeping the clear bra clean, sparkling, and clear.
As for cleaning and maintaining it, I ordered PLEXUS off of detailedimage.com. This is the stuff the installer recommended for keeping the clear bra clean, sparkling, and clear.
Originally Posted by treacherous
I paid $699 for install that included hood, fenders, bumper, lights, rear view mirrors, door edges and door cups
#15