Here's the next fix for your modding addiction.

P.S. Not all headlights are created equal



















5000K Philips on the low beam with TSX Lens and Cutoff Shield.
4300K Factory Osram TL Bi-Xenon projector for foglight/high beam
Factory projector lens in the turnsignal
5300K Electroluminicent strips in the clearance strip cutout. (took 4 hours total for just the strips)
Remote controlled LED city lights inside all projectors.
Housing painted Obsidian Black, Shrouds in Atlas Gray (only visiblly gray in the sun)

 

where does the clearance light assembly goes when you go from an 03 to 06 lights

 

06 Doesnt come with any clearance strip, so I cut out thin stripes on the clearance strip reflector on the 06 and use back lighting to light it up.

 

well if i dont do that im guessing you just dont plug in any bulbs in the clearance strip and just zip tie it off

 

what color are you painting it? also, what are you using to cut the strip so precisely? looks good

 

Im making this for someone. It will be painted Obsedian Black and the projector shrouds in slate gray, a really dark gray almost black. The clearance strip I cut it by hand first then trim the rest with dremel.

 

Oh NOW I understand what you mean. if you switch from 03 to 06 you only plug it in. The plugs are the same and the power will become the city light in the 06.

 

nice that sounds good. any close up pics?

 

nice

 

Cool, how much?

 

Nope, not done yet, it takes a long time to get them to be perfect.

give me a PM if intereted.

Paul

 

Lookin' forward to the pics!

Bat™

 

cant wait to see the finished product... im taking that you have HIDs for the fogs?

 

ok so the clearance strips are the city lights, and everything else is the same---turning, high\fog, and low...where are the city lights located

 

they are inside the foglight reflecter housing.