so if i wanted to do around the same tires for a 8.5 and a 9.5 i should do a 215/45 and a 225/40 ????

 

Wow so much tire talk the past 2 days...also good luck on getting HF approved, WFC seems like they approve just about anyone, getting on HF blog is a lil tougher..

bumping this back up for reference again.
As of 7/21/10

Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19


Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs:
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 9.5 +0 (25mm spacer)
19 x 8.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -4 all around (estimate)
Fender Work: Rolled very flat

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

 

WFC has recently gotten tougher on their approvals. You need to be flush with no wheel gap. You don't have to run stretched tires to get approved, meaty tires are welcome. Getting HF approved is hit or miss. There are a bunch of cars that deserve to be on there IMO that haven't been featured.

Made a slight change to mine Johnnny.

Donpisto
Wheel spec
20x9.5 -12
20.10.5 +0
Tires225/35
Camber: Front camber is -4.7 and rear camber is -7.5
Fender Work:rear were rolled flat, pulled and flared upward (upward flare not needed/not beneficial).

Gtfever:
Wheel Specs:
19x9+4
19x10-1
Tires:
215/35
225/35
Camber: -3 camber upfront and -4 out back
Fender work: Pulled

4drmadness
Wheel Specs:
Volk Winnings
19x9.5 +17
19x10.5 +19
Tires:
225/35/19
235/35/19
Camber: -3.8 back and -2.4 front
Fender work rolled flat

STCLAIRWEST
Wheel Spec:
19x9.5 +17
19x10.5 +9
Tires:
225/35/19
245/40/19
Camber: -2.5(fr) -2(r)
Fender Work: Pulled

dz n.u.t.z
Wheels Spec:
TE Rep
19x9.5 + 7
19x10.5 +22
Tires:
235/35/19
265/30/19


Wheel Spec:
Challenges
19x9.5 + 16
19x10.5 +23
Tires:
Nexens 245/35/19
Dunlop 275/30/19
Camber: -3.3
Fender work: Pulled

4DGS
Wheel Specs:
19x9 +10
19x10 +17
Tires:
Falken Fk452 215/35/19
Falken FK452 225/35/19
Camber: 2.3 all around
Fender Work: Mild roll

sag35777
Wheel Specs
19 x 9 +15
19 x 10 +15
Tires:
nexen 3000 235/35
nexen 3000 245/35
Camber: ???
Fender work:???

Johnnyone
Wheel Specs:
19x9 +9
19x10 +20
Tires:
Toyo Proxes T1R 225/35/19
Toyo Proxes T1R 245/35/19
Camber: -3.5 all around
Fender Work: Pulled

FlyingLumpia
Wheel Specs:
19x9 +32 with a 15mm spacer
19x10 +32 with a 10mm spacer
Tires:
225/40
255/35
Camber:???

CandlestickPark
Wheel Specs:
19 x 8.5 +0 (25mm spacer)
19 x 9.5 +10 (20mm spacer)
Tires:
Yokohama S-drive 225/35/19
Yokohama S-drive 235/35/19
Camber: -4 all around (estimate)
Fender Work: Rears pulled 5mm, fronts pinched flat and flared a bit

NAT&FFec
Wheel Specs
19x8.5+22
19x9.5+22
Tires:
255/35/19
255/35/19
Camber:-2F/-3R
Fender work: Rears rolled flat fronts pulled

TycoRC
Wheel Spec:
19x8.5 +20 JLBMotorsport Apollo's
19x9.5 +20
Tires:
Nexen N3000235/35/19
Nexen N3000245/35/19
Camber: -3.3 Front -3.75 Rear
Fender Work: Rolled very flat

 

^ cool, have you got your car aligned since the recent drop?

 

^Haven't gotten an alignment yet. I want to put my endlinks on before the alignment and with the new baby haven't had time yet. I haven't driven the car more than like 75 miles since I got the new tires.

 

^ cool congrats.

 

Thanks for keepin up with the updates Johnny. I'll have to update mine within a month.

 

ill be on that list very very very soon :-)

 

^ me to again

 

It's official. August 13th is when my wheels arrive. Hopefully I can pick up that day and get you guys some teaser pics. Looks like before September arrives wheels should be on.

 

^ just a few more weeks away.

No problem on the list guys.

After driving around stanced for 4 monrhs, i think im out of the game for awhile. Will be selling the coils and wheels here soon.

 

Huh...what happened Johnny? Say it ain't so.

 

1st Jeremie, now Johnny. Are going in alphabetical order beginning with the J's?

 

wait! What!?!? dude, im not sure if you have a camber kit or not. But just get your car aligned,camber kit and you will be good. You saw my stance & my tires last me about a year. I also drive 100 miles 5 days a week to work & back. Not including going to see clients or weekend crusing.

Johnny text me a price on the wheels....

 

^Those wheels would look sick on your ride. You already have the proper stance for them

But yeah Johny get an alignment to bring your toe into spec and flip your tires every 5K, you should be good.