I need wheel help...
#1
I need wheel help...
So this spring I am doing a little work to the ol' G. This work will include new wheels/tires and a nismo front and likely a gialla grill. My problem is this...I can NOT decide on what wheels I want to go with. I am really into the look of the Work T1S but am concerned about the weight. I was also looking at Volk Gt-s but those are again heavy. Do you guys have any suggestions?
#2
#4
#6
#7
Trending Topics
#8
Ohio G Club Member
iTrader: (6)
Join Date: Jul 2008
Location: Cleveland, OH
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
My car is slow so I was more worried about the look which is why I went with these. By hand they don't seem THAT much heavier than my old stock 18s
https://g35driver.com/forums/19-inch...ged-aeros.html
https://g35driver.com/forums/19-inch...ged-aeros.html
#10
#12
#13
Monoblock forged 19s are your best option, some other cast wheels are also relatively light as well though. The T1s are less than 25lbs anyways...not a bad deal if thats the look you want. Unless you are tracking, you'll never notice.
But like you I prefer as low weight as possible. All listed below are 19x__ and less than 25lbs at each corner, most below 23.
Plenty of wheels fit that description:
Advan RS, RG, RS-D, RG-D
AME Tracer, Circular
BBS RGR, RS-GT
Enkei RPF1, RPO3
Nismo LM-GT
Volk CE, TE, RE, SE, ME progressive...essentially any monoblock line Volks are under 23lbs for 19x9 to 10
honestly quite a few more if you go a hair above 25lbs at each corner...
It's up to you, many options to choose from. I for one love the Work T1-S, and it's not super heavy either by any stretch as compared to most multipiece wheels. Don't let a few extra lbs at each corner sway you from getting what you want. That being said function>form any day.
But like you I prefer as low weight as possible. All listed below are 19x__ and less than 25lbs at each corner, most below 23.
Plenty of wheels fit that description:
Advan RS, RG, RS-D, RG-D
AME Tracer, Circular
BBS RGR, RS-GT
Enkei RPF1, RPO3
Nismo LM-GT
Volk CE, TE, RE, SE, ME progressive...essentially any monoblock line Volks are under 23lbs for 19x9 to 10
honestly quite a few more if you go a hair above 25lbs at each corner...
It's up to you, many options to choose from. I for one love the Work T1-S, and it's not super heavy either by any stretch as compared to most multipiece wheels. Don't let a few extra lbs at each corner sway you from getting what you want. That being said function>form any day.
#15