how do you guys think 350z s techs will look on a sedan ??? cause im going to install them later today and want to no if there are any pictures with this set up .. i have yet to find a pic but im sure there are some out there ??? my rear fenders a cut so that should not be a problem ... im stock hight now and have about 3 finger gap in rear and 4 in the front ... how low will these springs go ??? thanks guys and later ill post some pic up for you all

 

here is my current set up on 350z tein S techs with struts and shocks

 

On the Z H-techs, when you guys cut the .5 inch off, is it cut on both sides or just the passenger side?

 

need more with oem 18's. lookin to go s-tech and i don't see how imma have camber issues but i guess ill see. any more other then the ob and the dg ones that were posted?

 

im about to purchase g s techs. anybody got pics of it on 18x9.5 and 245/45 profile tires?

 

Both sides.

 

S-Tech

 

Very sexy, even drop. I've got some s-techs coming in the mail soon

 

[IMG][/IMG]

G H-techs dont know why its lower than other ones on Htechs... even my mechanic who put them on says its lower than most

 

Here's an update on my suspension. Dropped the sedan from H Techs on stock sport suspension to S Techs with 06 Z struts/shocks. The springs seem to match will with the Z parts. Ride is taut but comfortable. I did this about 3 weeks ago in addition to front/rear camber kits. I previously rolled the rear fenders and run 245/40/19 all around on coupe 19s. Absolutely no rubbing or scraping ever. I really like the stance and might look at 5-10 mm spacers in the future but the set up is pretty flush.

 

For those who had 350z Htechs and then switched over to Stechs...how much of a diff in ride quality was it?? I have a set of Stech in my garage that I been meaning to switch over but I dont know if Im going to regret it later down the road or not.

 

G35 S-tech
please excuse the **** poor phone camera quality

 

how are your tires doing on this man. i just got some s-techs this week but not sure if i should wait and throw on camber kit and a-arms with it. im on the oem 18's as well

 

If I were you I would def get the rear camer kit on. With S-Techs you can slide without front Camber Arms.

 

^ ok well here is my next question. with s-techs and say 15mm spacers in front does that change the way tire sits? wouldnt it make more flat