Finally...
#1
Finally...
...my wheels aren't as tucked! I should have gone with 20mm.
Big thanks to Viet for hooking me up with some 15mm Ichiba spacers, Grant for saving me $435 on installation (WCN wanted $475 ), and Randy for letting us use his garage/tools!
What would I do without you guys?
Before the spacers:
After the spacers:
Camber is set at -3.0 in the front.
Next: 3mm or 5mm spacers in the rear...
Big thanks to Viet for hooking me up with some 15mm Ichiba spacers, Grant for saving me $435 on installation (WCN wanted $475 ), and Randy for letting us use his garage/tools!
What would I do without you guys?
Before the spacers:
After the spacers:
Camber is set at -3.0 in the front.
Next: 3mm or 5mm spacers in the rear...
Last edited by Calvin; 04-06-2008 at 01:27 AM.
#6
Originally Posted by redlude97
nice! looks much better. I'm in the process of ordering some 15mm spacers for my jlines as well. An rubbing at full lock?
Originally Posted by Adon
looks good.... what kind of camber kit you got up front?
and what was the offset on the front wheels to begin with ?
and what was the offset on the front wheels to begin with ?
#7
Trending Topics
#10