COBB AccessTuner Tune
#32
#33
#36
Can't quite see all your mods, Injen Intake, Moto Spacer, and Injen catback, anything else?
Did you ever have a true stock baseline done as in bone stock? Mine was 236 whp @ about 5900 rpm, peak torque 224 ft-lbs @ about 4900. It's been 5+ years since I had that first baseline, but for certain the power started dropping before 6300 rpm. I wanted to get at least one trip to the dyno pre-mods so I'd have some sense back in late 2003/early 2004 what the car was putting down stock.
This is W/O tune, w/o MODS, right off the boat, so don't bash the tuner, all they did that trip was 3 pulls for a baseline
Also I thought the mrev2 was a lower plenum mod for rev-up motors, not DE's? Which product are you referring to?
Thanks in advance.
Did you ever have a true stock baseline done as in bone stock? Mine was 236 whp @ about 5900 rpm, peak torque 224 ft-lbs @ about 4900. It's been 5+ years since I had that first baseline, but for certain the power started dropping before 6300 rpm. I wanted to get at least one trip to the dyno pre-mods so I'd have some sense back in late 2003/early 2004 what the car was putting down stock.
This is W/O tune, w/o MODS, right off the boat, so don't bash the tuner, all they did that trip was 3 pulls for a baseline
Also I thought the mrev2 was a lower plenum mod for rev-up motors, not DE's? Which product are you referring to?
Thanks in advance.
#38
Thread
Thread Starter
Forum
Replies
Last Post