Will these rims fit?
#1
Will these rims fit?
Hi guys my cousin has a set of wheels lying about, originally it was for an Evo 10, and now he's selling them I wanted to see if I'd have any difficulty fiting these sizes:
Wheels----------PCD-------Hole------Off set
19x8.5----------114.3-------5---------51
19x8.5----------114.3-------5---------45
19x8.5----------114.3-------5---------38
Same size wheels and tires for front and rear, would this cause me any issues since the G is a RWD?
Wheels----------PCD-------Hole------Off set
19x8.5----------114.3-------5---------51
19x8.5----------114.3-------5---------45
19x8.5----------114.3-------5---------38
Same size wheels and tires for front and rear, would this cause me any issues since the G is a RWD?
#2
I forgot to mention that I am lowered on JIC Magic coilovers, but only at the min drop height which I think is around 1- 1.5" lower than stock
and I know nothing about offsets or PCD or how these wheels would affect my handling so any help would be appreciated.
Also would it be ok to use the bolts that came with the wheels for the Evo X? or would I need to source newer ones?
and I know nothing about offsets or PCD or how these wheels would affect my handling so any help would be appreciated.
Also would it be ok to use the bolts that came with the wheels for the Evo X? or would I need to source newer ones?
#3
Hi guys my cousin has a set of wheels lying about, originally it was for an Evo 10, and now he's selling them I wanted to see if I'd have any difficulty fiting these sizes:
Wheels----------PCD-------Hole------Off set
19x8.5----------114.3-------5---------51
19x8.5----------114.3-------5---------45
19x8.5----------114.3-------5---------38
Same size wheels and tires for front and rear, would this cause me any issues since the G is a RWD?
Wheels----------PCD-------Hole------Off set
19x8.5----------114.3-------5---------51
19x8.5----------114.3-------5---------45
19x8.5----------114.3-------5---------38
Same size wheels and tires for front and rear, would this cause me any issues since the G is a RWD?
Those size wheels will be fine, i run the same on mine (except i have a +35 offset) with 255/40 tires and have no issues with it whatsoever.
p.s. You may also want to check the bore size on those wheels to make sure it fits on the G. Might need to get rings if that's the case.
#4
#5
If that is okay than the 38mm offset rim is your best fit.
#6
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
No, he is talking about the diameter of the hole in the center of the wheel. It has to slip over the hub on your car. I believe the proper bore size is 66.1 mm. If the bore on his is bigger than you can use them if you get hub centering rings.
If that is okay than the 38mm offset rim is your best fit.
If that is okay than the 38mm offset rim is your best fit.
Most aftermarket wheels are 73mm hubs & you need hubcentric rings to fit the Infiniti 66.1mm hub.
& I agree the 38mm offset is definitely the best choice of those wheels.
#7
Trending Topics
#9
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
ok now does anyone have a linky to where they sell these hub-centric rings? and are they advisable to use? or is it better to stay away from them?
What I mean is would I get any vibrations or bad feedback when fitting the hub-centric rings? as apposed to staying on my OEM wheels?
What I mean is would I get any vibrations or bad feedback when fitting the hub-centric rings? as apposed to staying on my OEM wheels?
You should be able to source them from any wheel vendor.
#10
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
Terry's data table has all that info in there.
https://g35driver.com/forums/v36-bra...ims-tires.html
https://g35driver.com/forums/v36-bra...ims-tires.html
#11
because I don't like adapters and stuff being stuck onto the wheels so are they safe? or could they add any vibrations? or does everyone need these hubcentric rings when getting aftermarket wheels?
lol I hope that makes it clearer
Also thanks for the link dude, it's got all the info I need
#12
#13
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
^whs; You won't find wheels other than OE that fit w/o rings.
BTW, if you do any track time I prefer aluminum rings like these.
Aluminum Hubcentric Rings
BTW, if you do any track time I prefer aluminum rings like these.
Aluminum Hubcentric Rings
#15
Ok slight update guys, I found out the rims are actually 19 x 9" Offset is 25:
Wheels----------PCD-------Hole------Off set
19x9 -----------114.3---------5----------25
Now according to the offset calculator I'll get:
Front
Inner Clearance: 1mm more
Outer position: Extended 39mm!!
Rear
Inner Clearance: 19mm more
Outer position: Extended 31mm
Now would I face rubbing issues? considering this will the size for both front and rear? 9" on the front? and dropped on JIC
Wheels----------PCD-------Hole------Off set
19x9 -----------114.3---------5----------25
Now according to the offset calculator I'll get:
Front
Inner Clearance: 1mm more
Outer position: Extended 39mm!!
Rear
Inner Clearance: 19mm more
Outer position: Extended 31mm
Now would I face rubbing issues? considering this will the size for both front and rear? 9" on the front? and dropped on JIC
Last edited by Defratos; 01-22-2010 at 08:46 AM.