What causes ABS light and VDC Off but "slip" light off? Wheel sensor? YAW Rate sensor?

 

Low brake fluid caused by pad wear.
Search through the tech section. There's a lot of threads on this subject.

Welcome to the forum, BTW.

 

Here's a few links...
https://g35driver.com/forums/v36-bra...elerating.html
https://g35driver.com/forums/v36-bra...ts-coming.html
https://g35driver.com/forums/v36-bra...ving-fast.html
https://g35driver.com/forums/v36-bra...light-all.html

 

Thx AV

 

Sticky it PLZ!!!!!!

 

thanks scott! ;-P

 

Under the bus with all of ya!

 

+5 bazzilion on the sticky....

 

Thank you all for supporting each other in the assumption that I am dumb. I am an ASE mechanic. And had you read the post I put up it did not say anything about the BRAKE light or Cruise light and also that the slip light was OFF not really very close to the sympoms everyone assumed were wrong caused by brake fluid. Thanks for any serious help.
PS the brake fluid is full. Brakes are fine. VDC does not work at all and nothing changes if you unhook a wheel sensor. Is there anyway to self diagnose which sensor is the culprit?

 

Ok it was a wheel sensor the little clip that keeps the wire connectors together was broke so it was seperated about 1/8 of an inch problem solved.

 

Since you are a ASE mechanic and we are not, does not make sense to ask us regular folks then...

Still i am glad you figured it out and posted your solution. You could have just tried the "assumed" solution that everyone suggested and come back and simply say thats not the issue, what next? Rather than highlighting our assumptive flaws and doubting our help...

 

I do appreciate anyones help on here and hope I can provide help to others, ASE doesn't mean I know near as much about the ins and outs of a G35 as someone who has owned one and modified or repaired it frequently