Your answer in in your question, It's because(well my honest guess) 2pc wheels are alot easier to make as for offering custom offsets because it's only a 2pc, 3 pc wheels would take londer to make since they need to get 3 pieces made. And imagine how long it would take to get a custom set of 3pc? While everyone else is as well...everyone is gonna have different offsets desired. It would just take way to long and would be alot of work just to keep that organized, and add that along to all the other wheels they are selling.

 

Alright guys, I currently have the G37 19" coupe wheels mounted on my 08 sedan lowered on eibach pro-kits, with camber set to about -1.1 to -1.3 degrees all around. The wheel specs for the coupe wheels are 19x8.5 F +43 with 225/45 tires and 19x9 R +45 with 245/40 tires. My stock sport wheels were 18x7.5 F +45 with 225/50 tires and 18x8.5 R +50 with 245/45 tires. I measured between the tire and fender to see what spacer i can install, but couldnt get an accurate measurement. I was hoping to install 20mm rear spacers and 15mm front spacers, is this doable? or is this not possible? Thanks in advance!!

 

www.google.com type in offset calculator click the first link then BAM itll measure it for you.

 

Hey guys, just need some help from the fitment guru's on here.

Ok so i got the SF challenges 19x9.5 +28F w/ 245/35 and 19x10.5 +23R w/ 275/35. Question is, i want to get a flush look, im on basics so its lowered, just want to know what kind of spacers i would need to look flush. oh and btw i dont have any camber arms or anything, i just lowerd it w/ tein basics and nothing else.

Thanks in advance.

 

Correct me if I'm wrong, experts...

You can fit +15mm in the front and rear. Just make sure to roll your rear fenders.

 

so 15s will be ok? seems like alot but hey, i dont know jack squat about it so im gonna take your word for it lol.

 

offset calculator will give you almost an exact number to what offset to run with those tire sizes. use it.

 

gt dont even bother telling them about the offset calculator.. if thats SO simple and they dont get it.. just tell them straight forward what to get

 

You're gonna have to roll the rears if you want a flush look, but yeah about 15's all around would suffice!

 

alright 15s it is! thanks Shane.

 

im going for an aggressive look:

volk gts +17 9.5 & +18 10.5, running hipermax iii coilovers lowered to the max, have spl camber arms in front and ichiba arms in front. 245 35 19 and 275 35 19 toyo t1rs...
my rears are rolled, whats the biggest spacers i can get... 10mm?

 

you should really get camber kits. im from aiea and i have a brand new set of kinetix rears if you want. for some reason pms dont work from my cel phone. pm me if interestted. mahalo!!!

 

What is the largest size tire you can fit on the stock 18's 7 spokes? As in, what is the widest....also, what size spacers would you recommend on the stock 18's?

 

How would 245/40/19 in the front and 275/40/19 on Rays 19s look on the the coupe. Is that way too much rubber?

 

Ok I'm kinda new at this but i just purchased a set of Venaci V124 20x9.5+20x10.5. I am on stock suspension but was thinking about getting tein s techs to lower the G on. Will i need to roll my fenders? And plus i want an aggressive look so would i be better off putting spacer all around and I'm not sure about what size, any suggestions? Or a Camber kit?

Thanks