what you guys need to understand about rubbing issues (that i see asked a million times) is that with the right fender work and camber(not too much if fender work is good) there would be minimal rubbing

but bobby808 those specs should be fine, depending on how low you go, they will tuck more and more as you go lower, so I would suggest a drop and THEN getting wheels that way you wouldn't need spacers

 

19x8.5 + 17 245/35/19
19x10 + 22 275/35/19

I'm dropped on 350z H&R Springs the front is a lil lower then the back... I'd say 1.5/1.1 I hope i don't have any rubbing issues You think i'll have to roll the rears?

 

ey you guys know any threads at other forums for tires that run big and small?

 

^^^theres a small one on VSC .. but i cant seem to find it right now

anyways .. offset kings

im looking at getting these specs

20x9.5 -8 225/35
20x10.5 -8 255/35

i would prefer a 35 series tire due to the fact of the crappy roadsi drive on, was thinking about running t1r's but i dont think they make a 225/35

i got stance coilovers, rears fenders have been shaved, so im thinking of taking the risk of trying to pull them a lil bit (talked to someone about it and they think its possible, the shave is super clean, there is no lip what so ever), i have rear spc and will be getting cusco front camber arms

your suggestions and comments are welcomed

 

hmm 9.5 -8, 10.5 -8, those specs seem REALLY familiar, oh yah because they are EXACTLY what i ordered.. interesting concept



anyways i hope you are pretty low for those specs, in which case you would need a pull anyways don't know why that wasn't an automatic decision in the first place

 

sorry cookie monster recommended them to me and yes i know i need a pull .. what tires do you plan on running ?

 

well i guess some people can't keep their mouths shut but good thing they aren't around anymore otherwise somethings would have to go down

but wut wheels r u getting?


i plan on getting generals but im stretching my rears

 

=/ i dont mean to cause any drama .. but thats the whole purpose of this thread .. no secrete offset society =) .. im looking at some SC1's .. does general make 225/35 and 255/35 ? cause i looked at t1r and it doesnt look like they offer a 225/35/20

 

dre your popular people want to copy your specs hahaha.

 

naw man don't trip its not your fault i was referring to cookiemonster but yah dude generals come in a lot of sizes, are you in socal? cus if u are i can hook u up on tires


and jeremie, its not this homie's fault, its pieces of **** that can't keep their mouths shut, it's all good, it goes around and comes around

 

o damn look what i started .. dre when you suppose to get your wheels ? def would like to see if thats how i want drive .. cause im not entirely sure i want to run that aggressive .. i might drop it down to -4 .. ya im in socal .. not to far from glendale, im near the LAX airport

what wheels you waiting for ?

 

check your pm

 

you might as well run -8 4mm isnt a huge difference.

 

^^^very true .. so then should i just get -10 ? its justt 2mm

 

haha up to you man, its whatever you think is perfect for your car you know? but honestly you wont even be able to tell with good fender work