haha i'm gonna have to take some pics of it tomorrow before i take it in....it looks stupid

 

haha well with the hints i gave not too many to choose from

 

B8 A4 was my other guess.

 

It was an 04 with 91k salvaged title and they payed off the rest of my loan which was 7500

 

If I were to run a 20x10.5 all around. What offsets would I need to be close to this kind of fitment front and back ?

 

Would it look alright putting F 245/35/19 R255/40/19 tires on coupe rims?

 

Tires look to be 235/35 or 245/35

Probably looking for around +10 offset.

Assuming it's for a G37...

Yea it's not really ideal but it'll work. Won't look too ridiculous but the fronts will be substantially smaller than the rears.

 

It's for a g35 sorry

 

Yo Blain, what spacers would look good or would you add on a coupe with an 2' drop with -3/-4 camber Wheel specs are 19x9.5/10.5 225/245 +0 all around. Would a +5 spacer on all four wheels make a big difference and look good? What would you do? Still on my journey to find a second set of wheels. Thanks bud.

 

In that case looking for probably closer to 0 offset. The front maybe a smidge higher +5-10ish.


I'd go 10mms front and rear. If you look way back at Dre's old set up on the T1s. He was 19x9.5 19x10.5 -8 225/245 and it's still one of my favorite set ups ever done on a coupe. (His camber was more like -2 and -3 IIRC)

 

Gotcha. That looks some dam good however will I run into any rubbing issues with only my rears rolled?

 

Unlikely, you'll need the hardware outta the front fenders but that's probably about it.

Hell I'm running the equivalent to 9.5 -7 on the front of my sedan with little to no rubbing.

 

By hardware.. do you mean removing the plastic fender liner?

 

Nope, just the few screws that hold it in, leave the liner tucked into the roller portion of the fender (factory rolled remember) if it is slightly too aggressive the front fenders are flimsy enough that they'll start to flare to fit the wheels anyways.

 

Hmm.. Running -10 around seems too aggressive. As I'm not comfortable go any lower with my kuruma and impul sides I have a feeling it would look odd since i'm not lower enough? I've seen another setup with the same wheels and slightly lower than me. his specs were 9.5 -3 & 11 +5 rears. I cannot make up my mind! What is a 11 +5 equivalent to on a 10.5 wheel?