Hey guys, about to purchase some new wheels for my g

I was looking at some wheels with these specs.

Size: 18 "x 8"

Bolt Pattern: 5x100 & 114.3

Off Set: +40mm

I was wondering what size offsets for front and back, should i do 25 front 30 back?

Bump
Also not sure about tire size to much. I'd appreciate any help!



I know theyre nothing fancy. but much better then stock 17's i have. :]

 

Hey guys i have been looking for rims for a while now and finally narrowed it down to this set:

XXr 530 in gold or flat black
front would be 19x8.75 with +15 offset
rear would be 19x10.75 with +15 offset

Would these fit on stock suspension without a drop? and i do know that a roll would be needed! Any tire suggestions?

Sorry mods if this is in the wrong place, feel free to move it!

Thanks for any ideas or thoughts!

 

yeah it'll fit.

 

Not to be rude but...

Ewww why would u get those wheels then not even drop it?? I wouldnt even know what to recommend for tire size cuz I dunno if u will eventually drop the car or what or u want a stretch or beefy tires...

 

Well i would have enough for some springs afterwards but not enough for camber or toe kits. I was thinking of the 350z H-techs?

 

Tire sizes for 19x8.5 et15 front 19x9.5et 15 rear on 03 g35 coupe lowered 1inch?

 

Have an 03 coupe with stock 18' rims
front tire 235/40/18
rear tire 245/40/18
dunlop direzza dz101

Looking to get these varrestoen but im not sure if my old tires will fit them..will they?
http://www.aspecwheels.net/index.php...roduct_id=4520

 

yeah they'll fit.

 

Thank you very much ^^

 

Howdy ya'll!

Just starting to dig into modifying a 2008 G35x I bought about a year ago. In looking at wheels in particular I am assuming that going with a staggered fitment with a larger rear rim may throw off things with the all wheel drive & active controls and would be better off staying with 4 of the same all around... Haven't run all wheel drive before. Any feedback is greatly appreciated!

Cheers,

~Tattoo

 

Yes, run all the same size and width (including tires) all around for AWD.

 

So I'm thinking about getting varrstoen 19x9.5 +12 in the front and 19x11 +15 in the rear. I am currently dropped on tein- s techs (z version) with rear springmount mod for even drop. I originally wanted a +0 offset in the front but I was wondering will this still look clean and flush? I like aggressive but not TOO aggressive as it is my daily driver.

My main question is: will i have issues in the rear? I plan on using factory sized wheels and stretching them but I was trying to avoid rolling the rear fenders if possible. and do you think I should run some spacers to make it more flush? i don't want the wheels to tuck in too much and look stupid, thanks!

 

you mean factory sized tires?

flush wise, it won't really be flush.

 

What specs do my wheels have to be so I can be as kool as Toretto??

 

Ok I have a set of 19x8.5 and 19x9.5. I already have a pair of 255/40/19 on the rear two, and am considering putting on 225/35/19 on the front two. Can I put a smaller diameter on the fronts? I don't want a fat tire or a really stretched look...what is a good size to match the rear?