Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#5761
Spacer Advice?
Hey guys, about to purchase some new wheels for my g
I was looking at some wheels with these specs.
Size: 18 "x 8"
Bolt Pattern: 5x100 & 114.3
Off Set: +40mm
I was wondering what size offsets for front and back, should i do 25 front 30 back?
Bump
Also not sure about tire size to much. I'd appreciate any help!
I know theyre nothing fancy. but much better then stock 17's i have. :]
I was looking at some wheels with these specs.
Size: 18 "x 8"
Bolt Pattern: 5x100 & 114.3
Off Set: +40mm
I was wondering what size offsets for front and back, should i do 25 front 30 back?
Bump
Also not sure about tire size to much. I'd appreciate any help!
I know theyre nothing fancy. but much better then stock 17's i have. :]
Last edited by Geewhiz420; 05-29-2013 at 02:46 AM.
#5762
Thoughts on wheel choice?
Hey guys i have been looking for rims for a while now and finally narrowed it down to this set:
XXr 530 in gold or flat black
front would be 19x8.75 with +15 offset
rear would be 19x10.75 with +15 offset
Would these fit on stock suspension without a drop? and i do know that a roll would be needed! Any tire suggestions?
Sorry mods if this is in the wrong place, feel free to move it!
Thanks for any ideas or thoughts!
XXr 530 in gold or flat black
front would be 19x8.75 with +15 offset
rear would be 19x10.75 with +15 offset
Would these fit on stock suspension without a drop? and i do know that a roll would be needed! Any tire suggestions?
Sorry mods if this is in the wrong place, feel free to move it!
Thanks for any ideas or thoughts!
#5764
#5767
Have an 03 coupe with stock 18' rims
front tire 235/40/18
rear tire 245/40/18
dunlop direzza dz101
Looking to get these varrestoen but im not sure if my old tires will fit them..will they?
http://www.aspecwheels.net/index.php...roduct_id=4520
front tire 235/40/18
rear tire 245/40/18
dunlop direzza dz101
Looking to get these varrestoen but im not sure if my old tires will fit them..will they?
http://www.aspecwheels.net/index.php...roduct_id=4520
#5768
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
The following users liked this post:
riceeeeeeeeee (06-06-2013)
#5770
? on staggered fitment G35 x
Howdy ya'll!
Just starting to dig into modifying a 2008 G35x I bought about a year ago. In looking at wheels in particular I am assuming that going with a staggered fitment with a larger rear rim may throw off things with the all wheel drive & active controls and would be better off staying with 4 of the same all around... Haven't run all wheel drive before. Any feedback is greatly appreciated!
Cheers,
~Tattoo
Just starting to dig into modifying a 2008 G35x I bought about a year ago. In looking at wheels in particular I am assuming that going with a staggered fitment with a larger rear rim may throw off things with the all wheel drive & active controls and would be better off staying with 4 of the same all around... Haven't run all wheel drive before. Any feedback is greatly appreciated!
Cheers,
~Tattoo
#5771
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
The following users liked this post:
Tattoo (06-07-2013)
#5772
So I'm thinking about getting varrstoen 19x9.5 +12 in the front and 19x11 +15 in the rear. I am currently dropped on tein- s techs (z version) with rear springmount mod for even drop. I originally wanted a +0 offset in the front but I was wondering will this still look clean and flush? I like aggressive but not TOO aggressive as it is my daily driver.
My main question is: will i have issues in the rear? I plan on using factory sized wheels and stretching them but I was trying to avoid rolling the rear fenders if possible. and do you think I should run some spacers to make it more flush? i don't want the wheels to tuck in too much and look stupid, thanks!
My main question is: will i have issues in the rear? I plan on using factory sized wheels and stretching them but I was trying to avoid rolling the rear fenders if possible. and do you think I should run some spacers to make it more flush? i don't want the wheels to tuck in too much and look stupid, thanks!
#5775