Varrstoen (te reps) in +22 or +12 with tein s techs for g35 coupe?
Registered User
Joined: Aug 2009
Posts: 45
Likes: 2
I appreciate the help guys. Ill probably go with a +22 with a 5mm spacer. My good friend is a Nissan master tech. He said a 275 rear was OK. He has a 285 on his 350z. He's had no vdc issues. As I said before the stance look is great. I just don't want a headache when it cone to where I can and can't go along with scraping. My girl works downtown and parks in a garage. I pick her up sometimes and love to set off car alarms with my exhaust ( yes, I'm that guy 
). Lastly, both your cars look great! Thanks again.
). Lastly, both your cars look great! Thanks again.Went to a 245 and believe me it takes a huge load off the *** end and your vdc
Will work properly. Not to mention lighten up your gas bill
And 0-60 times Cornering ability ALL that.. Just my 2 cents
So unless you have 500 plus hp to need all that extra "flab"
Your car will thank you
You're probably right jentz. I've noticed a difference in launch speeds. Cornering on the other hand is better (in my opinion). Chances are my next set will be 255/35. By then I should have the suspension done. Your advice didn't fall on deaf ears.
Registered User
Joined: Feb 2012
Posts: 14
Likes: 0
I feel lost on this thread. Asking offsets with no exact wheel spec.
I can run -12 on a 6" width wheel.
Maybe it's where I came from, but offsets are questions with the width of the wheel.
Don't tell me that you stated the tire size. I ran 245/40 on an 11" wheel so that doesn't really tell me anything.
I can run -12 on a 6" width wheel.
Maybe it's where I came from, but offsets are questions with the width of the wheel.
Don't tell me that you stated the tire size. I ran 245/40 on an 11" wheel so that doesn't really tell me anything.
I have Varrs 2.2.2 +12 with a 4mm spacer, so I'm at +8 Im lowered on 350z H-techs & spring mount mod. Im currently running 245/35 & 275/35...the rears do look to chunky, but i didn't like the 275/30 (too profile and large fender gap)..I need opinions on should I go with 285/30 or 265/35??? want to keep the fronts as is...ive searched for hours to see pic set ups, and the ones I like, they don't say what tire size they're running. 
Joined: Jan 2010
Posts: 9,884
Likes: 635
From: Back in the OC FTMFW!
I run a 275/30 in the rear and hate how little sidewall I have...I say go with the 265/35 but that wouldn't really close the fender gap....only way too really do that is to go more low
i appreciate it!! heres my updated one from yesterdays Import Alliance Atlanta with even bigger spacers and dumped..the pic i posted on page 7 was from Novembers 2011 Import Alliance..heres some from yesterday
