How much does it usually cost to paint the OEM side skirts?
#1
#4
#5
#6
I'll be doing mine in a few weeks. I got paint today which cost me about $100 for all PPG produts including the OEM base/clear paint, harder, reducer, and adhesion promotor. I've already got the compressor and spray gun. Painting is the easy part. Getting the sills nice and clean will take some time. I'll be doing a DIY for painting the sills for those that have a compressor and spray gun.
Last edited by DaveB; 10-26-2007 at 02:41 PM.
#7
Originally Posted by DaveB
I'll be doing mine in a few weeks. I got paint today which cost me about $100 for all PPG produts including the OEM base/clear paint, harder, reducer, and adhesion promotor. I've already got the compressor and spray gun. Painting is the easy part. Getting the sills nice and clean will take some time. I'll be doing a DIY for painting the sills for those that have a compressor and spray gun.
Trending Topics
#8
Originally Posted by AgentAero04
Yep looked into that aspect also.Gonna take lots of wet sanding with a "clear" ultra fine paper.And I would suggest a hobby shop for the best assortment of fine to course sandpapers.
1) Clean with super hot water and strong soap like dishwashing soap
2) Isopropyl alcohol wipe down
3) Spray panel with water. If it beads, it's not clean yet.
4) Lightly scuff with a 400 to 600 grit sandpaper
5) Hot water and soap bath, isopropyl alcohol, tack cloth
6) Adhesion promotor, dry 15 to 20 minutes
7) Paint, 2 to 3 coats
Thread
Thread Starter
Forum
Replies
Last Post
yoyoyo8
Exterior - Body Parts
1
08-12-2015 03:04 AM
st33zygill
Exterior - Body Parts
3
07-29-2015 10:05 PM