Lower Control Arm Removal Problem [PIC]
#1
Join Date: Jul 2009
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Lower Control Arm Removal Problem [PIC]
I am in the process of removing my whole front suspension and i am getting stuck on the the different ball joints.
I have removed the cotter pin out of the bolt but i cannot unscrew it. When i turn the nut, it just spins the bolt and all.
I am just trying to remove the knuckle / spindle from the lower control arm.
Im working on it in the garage currently, help is very appreciated.
I have removed the cotter pin out of the bolt but i cannot unscrew it. When i turn the nut, it just spins the bolt and all.
I am just trying to remove the knuckle / spindle from the lower control arm.
Im working on it in the garage currently, help is very appreciated.
#2
I am in the process of removing my whole front suspension and i am getting stuck on the the different ball joints.
I have removed the cotter pin out of the bolt but i cannot unscrew it. When i turn the nut, it just spins the bolt and all.
I am just trying to remove the knuckle / spindle from the lower control arm.
Im working on it in the garage currently, help is very appreciated.
I have removed the cotter pin out of the bolt but i cannot unscrew it. When i turn the nut, it just spins the bolt and all.
I am just trying to remove the knuckle / spindle from the lower control arm.
Im working on it in the garage currently, help is very appreciated.
#7
Join Date: Jul 2009
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
So did you get it off? Pickle fork won't help you until you get the nut off...another trick if you don't have a pickle fork is to rap the arm on the outside with a hammer, it'll loosen the tapered shaft of the control arm from the spindle.
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM