FS: Stillen Intercooled Supercharger - Stage 3
#1
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
FS: Stillen Intercooled Supercharger - Stage 3
FS: Stillen Stage 3 Intercooled Supercharger 410hp
I am selling my stage 3 roots style supercharger. The kit is complete. All pulley's that incorporate bearings were replaced at the time of my last oilchange (from Stillen). New belts are also included.
This is a very safe and reliable kit. If you know what you are doing, you can install this yourself.
Retail Price: $5,818.18
Asking: $2,500.00
This kit includes:
Roots style blower – low miles.
Plenum with heat exchanger
Plumbing for coolant distribution
Coolant reservoir tank
Coolant pump and mounting brackets
Bumper mounted heat exchanger and brackets (great condition)
Stage 3 (Gold) Pulley
All pulleys and idlers. Everything with bearings were replaced at the time of my last oilchange
New belts (I think I have a few sets)
7th Injector
Fuel system adapter
SS Box tuned for non-revup VQ35DE
6 one-step-colder NGK spark plugs – Used.
Other misc parts.
Supercharger webpage:
http://www.stillen.com/product.asp?i...=&make=&model=
A Stillen Hood or Cowl is required for blower fitment:
http://www.stillen.com/product.asp?id=STIHOOD01&c=EX
I am selling my stage 3 roots style supercharger. The kit is complete. All pulley's that incorporate bearings were replaced at the time of my last oilchange (from Stillen). New belts are also included.
This is a very safe and reliable kit. If you know what you are doing, you can install this yourself.
Retail Price: $5,818.18
Asking: $2,500.00
This kit includes:
Roots style blower – low miles.
Plenum with heat exchanger
Plumbing for coolant distribution
Coolant reservoir tank
Coolant pump and mounting brackets
Bumper mounted heat exchanger and brackets (great condition)
Stage 3 (Gold) Pulley
All pulleys and idlers. Everything with bearings were replaced at the time of my last oilchange
New belts (I think I have a few sets)
7th Injector
Fuel system adapter
SS Box tuned for non-revup VQ35DE
6 one-step-colder NGK spark plugs – Used.
Other misc parts.
Supercharger webpage:
http://www.stillen.com/product.asp?i...=&make=&model=
A Stillen Hood or Cowl is required for blower fitment:
http://www.stillen.com/product.asp?id=STIHOOD01&c=EX
#5
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
According to Chuck (supercharger specialist) at Stillen, there is no programing difference between the Auto and Manual. It is the same box.
Here is a pic of it at the time of install. Engine bay is dirty.. The red wires are Gorgee's Grounding Gear and that is an AEM intake.
No I do not have the hood... I ordered the hood for the coupe by accident (since sold it) but I have the sedan. I didn't notice until I completed the SC install. So, at the time it was my only vehicle and I decided to cut a hole in the factory hood, temporarily, but I ended up leaving it that way! Not most forum member's cup of tea, but people love it in person... Here's a pic.
As for the power output, I never had it dyno'd, so I don't have any numbers. Stillen claims 410 at the crank. Most tuners seem to overstate stats, but it's probably pretty close. At the drag strip I was just a little bit faster than an Acura NSX and new BMW M3 - and that's with the Sedan...
Here is a pic of it at the time of install. Engine bay is dirty.. The red wires are Gorgee's Grounding Gear and that is an AEM intake.
No I do not have the hood... I ordered the hood for the coupe by accident (since sold it) but I have the sedan. I didn't notice until I completed the SC install. So, at the time it was my only vehicle and I decided to cut a hole in the factory hood, temporarily, but I ended up leaving it that way! Not most forum member's cup of tea, but people love it in person... Here's a pic.
As for the power output, I never had it dyno'd, so I don't have any numbers. Stillen claims 410 at the crank. Most tuners seem to overstate stats, but it's probably pretty close. At the drag strip I was just a little bit faster than an Acura NSX and new BMW M3 - and that's with the Sedan...
#7
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
This unit has the 4 rib set up. I would have upgraded to the 6 rib when it became available, but I don't have any slippage issues at all.
Trending Topics
#10
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by tylersphile; 04-27-2009 at 04:43 PM.
#11
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
It will fit the coupe with no modification to the kit, providing you have the Non-revup motor.
#14
Join Date: Sep 2006
Location: Calgary, Alberta, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure... you would have to contact Stillen. I'm guessing yes.