Pressure washer?
#1
#2
#3
Charter Member Florida G35 Club
iTrader: (1)
Joined: Dec 2003
Posts: 1,577
Likes: 0
From: Orlando, FL
I've been using a pressure washer on my car for about a year. It works great on the wheels and bumper (a lot of bugs in FL). I haven't had any problems. Just don't use a tip with too much pressure and DON'T get too close and you will be fine. As for wax, I use Zaino and it holds up great.
#4
I would say that, in general, to NOT use a pressure washer on your car's painted parts [pressure washers come in different "powers" so perhaps a low pressure unit would be acceptable].
Anyway, if you had a chip in your paint's finish, a pressure washer might end up catching the edge of the chip and hence peeling up more paint. Keep in mind that pressure washers are sometimes used to strip paint in commercial applications, so depending upon how many psi the washer is rated at, it could do the same on your car.
Anyway, if you had a chip in your paint's finish, a pressure washer might end up catching the edge of the chip and hence peeling up more paint. Keep in mind that pressure washers are sometimes used to strip paint in commercial applications, so depending upon how many psi the washer is rated at, it could do the same on your car.
#7
Originally Posted by roneski
Is that any worse than rubbing it in with a wash mitt?
ive never used one so i dont know the exact procedures...
Trending Topics
#8
Roneski,
I've been using a pressure washer at least 6 years now and have never had a problem in using it. Its is great for cleaning your rims( esp if you have aftermarket mesh type).
The unit I use is electric and is lower powered( I think that it is under 1500psi) and it comes with two wands. One for general cleaning( the tip is adjustable from mist to a sharp jet) and the other is for power blasting( def not for the car!!!). The brand is Simoniz.
I'm happy with the way it performs and it has been a blessing in some cases. I've had my car egged and it was easily removed with the power wash.
As for removing/ damaging the surface of the car, there is nothing to worry about. Wax your car on a routine basis. You are lucky that you live in a warm climate where I live in Toronto, Canada. I don't get to wax in the winter and my car is parked outside 99% of the time.
Good luck if you deside to purchase a power washer.
One more thing, I still use a two mit system to wash my car. One for the top half and one for the lower.
35BILLS
I've been using a pressure washer at least 6 years now and have never had a problem in using it. Its is great for cleaning your rims( esp if you have aftermarket mesh type).
The unit I use is electric and is lower powered( I think that it is under 1500psi) and it comes with two wands. One for general cleaning( the tip is adjustable from mist to a sharp jet) and the other is for power blasting( def not for the car!!!). The brand is Simoniz.
I'm happy with the way it performs and it has been a blessing in some cases. I've had my car egged and it was easily removed with the power wash.
As for removing/ damaging the surface of the car, there is nothing to worry about. Wax your car on a routine basis. You are lucky that you live in a warm climate where I live in Toronto, Canada. I don't get to wax in the winter and my car is parked outside 99% of the time.
Good luck if you deside to purchase a power washer.
One more thing, I still use a two mit system to wash my car. One for the top half and one for the lower.
35BILLS
#9
#10
I agree with ZAZA. Detailing Dynamics who sponsors the GSquad uses them to wash their customers cars (Ferrari's, Lambo's, you name it). At a recent detailing day, they spoke about using a pressure washer and offered what I thought was a very good tip. Obviously, you don't want to use too much pressure, they said hold your hand in the water (may need someone to hold the wand), far away and bring it closer and closer to the wand. When it starts to hurt your hand, that's the point where it's a lil too much. Never come closer then that distance.
They mentioned the benefit of the pressure washer is that is blows as much dirst as possible off, before ever touching the car. Seems logical to me!!
They mentioned the benefit of the pressure washer is that is blows as much dirst as possible off, before ever touching the car. Seems logical to me!!
#11
I stopped using the pressure washer.
It may have been coincidental but right after using it I could swear my brakes started to squeak. I've tried bedding them again but that doesn't work so I'm guessing that I might have blasted some of the silicone grease off the brakes when I tried to clean the Brembos by directing a strong stream of water at them.
It may have been coincidental but right after using it I could swear my brakes started to squeak. I've tried bedding them again but that doesn't work so I'm guessing that I might have blasted some of the silicone grease off the brakes when I tried to clean the Brembos by directing a strong stream of water at them.
#12
#13
#14
Registered User
iTrader: (8)
Joined: Oct 2004
Posts: 6,647
Likes: 12
From: South East Texas
Q50 Red Sport 400 RWD
Use the pressure washer to wet the car and rinse off loose dirt and bugs--do not get too close, then use a mit as usual, then use the p. washer to rinse off the car--again not too close and the right tip. If you rely on the p.washer alone to remove grime--it won't work--it will leave a grime layer, just like at the car wash--if your car is really dirty and you don't hand rub it. My opinion.
#15
Re:
It migt depend on where you live. Around here at school I have to wash my car at a friends house and they have really crappy water pressure there so it doesnt provide the pressure washer with too much pressure. It was my first time washing my car with a pressure washer and I was a little unsure too but just dont get too close. I used it to wash the whole car and it worked out fine but it does more or less take off your wax at least it did mine. I would say its ok to use it just be careful with it.