I'm thinking of trying to fit a couple gauges into the cubby where a stock nav would be located if originally equipped.

The door seems hallow and a dremel would make short work of it. I'd like to be able to close the door and have the gauges hidden when not in use.

Thought I'd check to see if anyone has tried......

Thanks,

George

 

here are a few pix of what i found, i know its not exactly what your talking about but i know i have seen people do it b4m just unsure how easily done it is... good luck...

 

Thanks for the response. Like you said..... Close but not quite. Worked on it today a bit. It's going to be close cause the depth of the gauges.

 

i like this gauge setup. do you know where its available?

 

I will be doing something similiar, but instead of guages, I would like to place a small digital display in the flip-up lid if any will fit.

 

lucid:
the guy custom fabricated that piece t o attach to the clock piece, and took the ash trey out n fabricated 2 guages in the space... its really not hard or if you know a good body guy who is good at fabricating...

ezg:
also to the guy ho started the thread, u know they make gauges that are not deep u can get the skinny ones which will run u more $ but u will get the out come your looking for...


Joe

 

cool thanks fro the info

 

here are a few site with some guage pods and some you can fabricate

if you look down on this one there are a few dif ones
http://www.streetbeatcustoms.com/int...auge-pods.html

http://www.advancespeedshop.com/epod...2b-p-6058.html

http://intensepower.com/infuatrpodg3.html

http://www.horsepowerfreaks.com/perf...ges/Gauge_Pods

 

https://g35driver.com/forums/forced-...auges-g35.html

 

OP dont u live in MD??

 

Damn Lance, quit smoking that stuff and spinning on your head. I was up there on business when I picked up your intercooler.

I work in Mussissippi but have a daughter in Nashville. Luckily I can split my time between the two.

How is your G? I haven't seen any updates in a while

George

 

Nice thread. Were you pointing out redundancy or options? There are several diff. Solutions shown but I didn't see where anyone cut into the cubby door.

 

lmao.... you mean break dancin on my neck..lol

I see your G is beastin George.. im glad to see your ride is hittin them high notes. I remember we were doing the builds right about the same time. I would luv to see some pics of her.

My car is about to transform again. I made 554 at the wheels on the UTEC.. im running otta fuel so now time to upgrade statge two of my project..here is the link to the update..

https://g35driver.com/forums/forced-...-part-two.html

 

OP, did you manage to place the gauges in the lid?

 

another place you can hide stuff is the sunglass compartment, pretty simply to run the wires and you can open/close on demand. I've got my AVC-R tucked away in there