Come and ride with a G (pics and vids)
Originally Posted by Gman2004
I can't see my turbos cause they are by the manifolds, but I have heard of turbos glowing red after hard runs.
thanks Gman that puts me at ease man i was starting to worry i thougt there was something wrong with it... this happened after a canyon run... when i got to the top i opened the hood and the turbo + part of the downpipe was glowing.
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
Originally Posted by Easein2itG
Lol, I thought you were going to say that. Talk about multi tasking at 140+!
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
Originally Posted by jimmytango00
thanks Gman that puts me at ease man i was starting to worry i thougt there was something wrong with it... this happened after a canyon run... when i got to the top i opened the hood and the turbo + part of the downpipe was glowing.
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
Originally Posted by jimmytango00
its not on my G its on my rx7 turbo 2 but i might just do that. i was just worried something was really wrong and i was going to mess something else up.
Originally Posted by Gman2004
here are the codes I throw.
0123 - Throttle position sensor/switch a circuit high input - might need to readjust throttle position. Nissan can do this.
0138 - Rear O2S, Bank 1 Maximum Voltage Monitoring - no worries on this one.
0172 - System too rich bank 1 - better rich than lean, no big deal.
0175 - System too rich bank 2 - same as above.
1122 - Throttle position sensor and MAF sensor not match - and never will. The FCON elimnates my MAF.
1148 - Closed Loop, Bank 1 - ??? Not sure about this one.
2135 - Throttle Position Sensor - again, may want to have Nissan reset the throttle position.
0123 - Throttle position sensor/switch a circuit high input - might need to readjust throttle position. Nissan can do this.
0138 - Rear O2S, Bank 1 Maximum Voltage Monitoring - no worries on this one.
0172 - System too rich bank 1 - better rich than lean, no big deal.
0175 - System too rich bank 2 - same as above.
1122 - Throttle position sensor and MAF sensor not match - and never will. The FCON elimnates my MAF.
1148 - Closed Loop, Bank 1 - ??? Not sure about this one.
2135 - Throttle Position Sensor - again, may want to have Nissan reset the throttle position.
Thanks, those all make sense.
What are you using to read your codes?
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
Originally Posted by ttrank
Thanks, those all make sense.
What are you using to read your codes?
What are you using to read your codes?
http://www.digimotosales.com/shop/
Registered User
Joined: Mar 2006
Posts: 3,975
Likes: 4
From: Jersey
Registered User
Joined: May 2006
Posts: 291
Likes: 0
From: Brooklyn, NY
This is a little off topic but i have been posting and no1 seems to answer...
I WANT TO GET SOME GAUGES FOR MY G (AIR/FUEL ETC) BUT I DONT KNOW HOW TO INSTALL THEM MYSELF, NOW I SEE THAT YOUR G HAS THEM SO I WANTED TO KNOW WHERE COULD I GO TO GET THEM INSTALLED..WOULD A REGULAR MECHANIC BE ABLE TO DO THIS? OR WHAT?
THANKS IN ADVANCE
I WANT TO GET SOME GAUGES FOR MY G (AIR/FUEL ETC) BUT I DONT KNOW HOW TO INSTALL THEM MYSELF, NOW I SEE THAT YOUR G HAS THEM SO I WANTED TO KNOW WHERE COULD I GO TO GET THEM INSTALLED..WOULD A REGULAR MECHANIC BE ABLE TO DO THIS? OR WHAT?
THANKS IN ADVANCE
