Registered User
Quote:
Lol, I thought you were going to say that. Talk about multi tasking at 140+!Originally Posted by Gman2004
Um, me.
Registered User
Quote:
Originally Posted by Gman2004
I can't see my turbos cause they are by the manifolds, but I have heard of turbos glowing red after hard runs.
thanks Gman that puts me at ease man i was starting to worry i thougt there was something wrong with it... this happened after a canyon run... when i got to the top i opened the hood and the turbo + part of the downpipe was glowing.
Quote:
Make sure you are on a straight a way if you're gonna try that at home.Originally Posted by Easein2itG
Lol, I thought you were going to say that. Talk about multi tasking at 140+!

Quote:
what kind of turbo do you have? you may want to ceramic coat the hot parts. I coated my manifolds and down pipes. It helps with the heat.Originally Posted by jimmytango00
thanks Gman that puts me at ease man i was starting to worry i thougt there was something wrong with it... this happened after a canyon run... when i got to the top i opened the hood and the turbo + part of the downpipe was glowing.
Registered User
its not on my G its on my rx7 turbo 2 but i might just do that. i was just worried something was really wrong and i was going to mess something else up.
Quote:
my sister's boyfriend use to have an RX-7. In fact when I said I've heard of turbos glowing red after hard runs it was his car I was refering to.Originally Posted by jimmytango00
its not on my G its on my rx7 turbo 2 but i might just do that. i was just worried something was really wrong and i was going to mess something else up.
Quote:
0123 - Throttle position sensor/switch a circuit high input - might need to readjust throttle position. Nissan can do this.
0138 - Rear O2S, Bank 1 Maximum Voltage Monitoring - no worries on this one.
0172 - System too rich bank 1 - better rich than lean, no big deal.
0175 - System too rich bank 2 - same as above.
1122 - Throttle position sensor and MAF sensor not match - and never will. The FCON elimnates my MAF.
1148 - Closed Loop, Bank 1 - ??? Not sure about this one.
2135 - Throttle Position Sensor - again, may want to have Nissan reset the throttle position.
Originally Posted by Gman2004
here are the codes I throw. 0123 - Throttle position sensor/switch a circuit high input - might need to readjust throttle position. Nissan can do this.
0138 - Rear O2S, Bank 1 Maximum Voltage Monitoring - no worries on this one.
0172 - System too rich bank 1 - better rich than lean, no big deal.
0175 - System too rich bank 2 - same as above.
1122 - Throttle position sensor and MAF sensor not match - and never will. The FCON elimnates my MAF.
1148 - Closed Loop, Bank 1 - ??? Not sure about this one.
2135 - Throttle Position Sensor - again, may want to have Nissan reset the throttle position.
Thanks, those all make sense.
What are you using to read your codes?
Quote:
What are you using to read your codes?
CTool OBD IIOriginally Posted by ttrank
Thanks, those all make sense. What are you using to read your codes?
http://www.digimotosales.com/shop/
Registered User
Quote:
+1. I like the car and mods, but take it to the track and keep others safe.Originally Posted by GeeWillikers
Unreal. 80+ through a neighborhood... Nothing else to say.
Registered User
This is a little off topic but i have been posting and no1 seems to answer...
I WANT TO GET SOME GAUGES FOR MY G (AIR/FUEL ETC) BUT I DONT KNOW HOW TO INSTALL THEM MYSELF, NOW I SEE THAT YOUR G HAS THEM SO I WANTED TO KNOW WHERE COULD I GO TO GET THEM INSTALLED..WOULD A REGULAR MECHANIC BE ABLE TO DO THIS? OR WHAT?
THANKS IN ADVANCE
I WANT TO GET SOME GAUGES FOR MY G (AIR/FUEL ETC) BUT I DONT KNOW HOW TO INSTALL THEM MYSELF, NOW I SEE THAT YOUR G HAS THEM SO I WANTED TO KNOW WHERE COULD I GO TO GET THEM INSTALLED..WOULD A REGULAR MECHANIC BE ABLE TO DO THIS? OR WHAT?
THANKS IN ADVANCE
THE BATMOBILE
so sick Jorge......car looks great.........finally up and running well.......love the gt7's and TS front........sweet video also.......what song is that??

