05 with 55,000 miles

So, heres my list of to do's

1. Y-Pipe
2. Rear Shocks
3. Sway Bars
4. Rotors
5. Brake Lines
6. Spacers

Y-Pipe probably motordynes xyz... resonated or straight?

Best deal on OEM rear shocks?

Sway Bars... no idea

Rotors... drilled/slotted suggestions?

Steel braid brake lines... ideas?

Spacers- I'm going with the bolt on ones so that the threads are not shortened.. best deal?

I'll be going down to S&R Performance in tampa to get re-tuned after the y-pipe...
i dont know which would sound better straight or resonated. currently i have a little rasp around 2800-3500 rpms under throttle.

Keep in mind currently I have motordyne 5/16 spacer iso thermal kit and lower plenum, as well as the art pipes and a z tube

Thanks guys while im on break from school im trying to get everything done!

Working on that buddys got a set of 350z srings he said I could have. Not look for a huge drop still my dd but will those work? Only lookin for maybe an inch or so

I like that going to do that this weekend. I have a can of plasti dip still from my lip. Did you plasti dip then paint over or jus straight plasti dip?

It was dipped for a short time only just to see if I actually liked it or not. I did. So I painted it after the dip was removed.

What mods should I do??

In for this!!^

The 350z springs are good for a half inch I believe. Very mild, but could be what you're lookin for. I personally like the eibach pro kit. Still very mild at about an inch, but the spring rate is much better. It really closes that gap nicely.

Uh oh I see there is a nismo front bumper knock off by E-racingKBM..anybody has one? Don't lie..

So I posted this in the sedan random question thread....sorry. So sorry. Lol
Anyways
For my revup 05
Who here would condone or at least agree with me buying a used non revup lower plenum and pairing with a MD spacer...this all of course opposed to buying a mrev2 and md spacer.


Gracias

I was talking to a guy who had one and he said the quality and fit is really good..

I got one for s**** and giggles. Not the greatest fit and you'll need extra screws and what not. I didn't trust the hardware they gave me.

the fact that the holes have to be drilled Im convinced you can make it fit. what area do you have trouble?

recently bought a 07 g35 coupe, got a good deal on it so i had to pull the trigger

i bought a r2c air intake, 5/16 spacer, mrev2, jdm clear corners, and had a resonator delete.

Was wondering if I should just buy art pipes for the time being until i save up for the shockwave tdx2? Read a couple threads on the stock exhaust+art pipes, looks like a good buy plus i would get better sound too right?

and after art pipes and exhaust are finished, are there any other important mods to do performance wise? i know ill prob get a tune in the future, but i just wanna get all the bolt ons done before so. prob look at doing exterior work when im done all the performance bolt ons.

There is a lot more you can do performance wise lol.

MotorDyne ART Pipes with MotorDyne XYZ + resonator on stock exhaust....YAY or NAY?