OFFICIAL "What Mods Should I Buy for my Coupe?" Thread
#241
Also, fyi I'm not a huge "driver" or anything. I have never had a nice car, so I don't feel like I need to upgrade the driving feel or anything because this car is amazing to me. I don't run it to death(well I do some, but I won't for long), I am all about the looks first off before I am about upgrades to engine or anything.
I really just don't know where to go for mid-level rims or maybe a new grille or anything of that sort, I have been searching around here so hopefully I get some ideas
I really just don't know where to go for mid-level rims or maybe a new grille or anything of that sort, I have been searching around here so hopefully I get some ideas
#242
Also, fyi I'm not a huge "driver" or anything. I have never had a nice car, so I don't feel like I need to upgrade the driving feel or anything because this car is amazing to me. I don't run it to death(well I do some, but I won't for long), I am all about the looks first off before I am about upgrades to engine or anything.
I really just don't know where to go for mid-level rims or maybe a new grille or anything of that sort, I have been searching around here so hopefully I get some ideas
I really just don't know where to go for mid-level rims or maybe a new grille or anything of that sort, I have been searching around here so hopefully I get some ideas
#243
#244
Registered User
iTrader: (23)
Join Date: Nov 2007
Location: SoCal
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
????? What is the cheapest way to mod your ride? There's no guide line or lists put together based on price......... Do what you want but try not to go cheap; your car isn't.
Use the search button. Lots of thread on starter mods you can do and mods you can do under $100. Most will only be small changes...
Use the search button. Lots of thread on starter mods you can do and mods you can do under $100. Most will only be small changes...
#245
Cheap is bad. Inexpensive and bang for the buck value is good.
Engine:
Motordyne 5/16" Spacer = $199 (+WHP)
Z-tube = $60 (+Sound)
06+ Rev-up Box = $60 (+WHP and +Sound)
Example Total: $319
Exhaust:
Berk High Flow Cats = $400 (+WHP and +Sound)
Example Total: $400
External:
06+ Projector Headlights = $500 (+Looks and +Utilitarianism)
Painted Gloss Black front grill = $30 (DIY)
Painted OEM Wheels = $40 (DIY)
Painted Rear Apron/Diffuser = $80 (@ Bodyshop)
Example Total: $650
Good looking car with great intake mods = Total of $1,369
Internal:
Lots of LED and choices here, you're on your own.
Get into Exhausts, Bumpers, hoods, trunks, spoilers, CF, side-skirts, name-brands, etc. You're looking at a couple thousand every time. But even here, some of these mods cost of $100. You can certainly shop around for quality parts in the marketplace, but if you don't want the "ricer" look, then it's big money.
Engine:
Motordyne 5/16" Spacer = $199 (+WHP)
Z-tube = $60 (+Sound)
06+ Rev-up Box = $60 (+WHP and +Sound)
Example Total: $319
Exhaust:
Berk High Flow Cats = $400 (+WHP and +Sound)
Example Total: $400
External:
06+ Projector Headlights = $500 (+Looks and +Utilitarianism)
Painted Gloss Black front grill = $30 (DIY)
Painted OEM Wheels = $40 (DIY)
Painted Rear Apron/Diffuser = $80 (@ Bodyshop)
Example Total: $650
Good looking car with great intake mods = Total of $1,369
Internal:
Lots of LED and choices here, you're on your own.
Get into Exhausts, Bumpers, hoods, trunks, spoilers, CF, side-skirts, name-brands, etc. You're looking at a couple thousand every time. But even here, some of these mods cost of $100. You can certainly shop around for quality parts in the marketplace, but if you don't want the "ricer" look, then it's big money.
The following users liked this post:
Agent27 (05-25-2012)
#247
performance, looks or both.
post a rough figure of your budget and last try using the search button or browsing around the forum then post
#249
#251
#252
Registered User
iTrader: (23)
Join Date: Nov 2007
Location: SoCal
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! Can't wait to get a professional shoot done. Actually I am planning on something for the headlights. I seen Sammy_G's car in person and fell in love with painted headlights.
either something two-toned/ fully blacked out like this
or leaving the chrome around the projector like these
What do you think
#253
Time to start Modding
ok i have had my G for almost two years now all stock. the time has come to start modding. here is a list of what i want to do. i need some input on if these are good to do or just a waste of time. i know a little about cars but not a lot so thats why im asking. im open to any suggestions
eventually i want to go FI and get the GTM twin turbo kit but that wont be for a while. thanks for the input in advance
- bassani exhaust
- z tube
- hks hipermax ls+ coilovers
- a set of TWS jarama rims 20x10rear & 20x8.5front
- motordyne mrev2 manifold
- motordyn copper iso thermal plenum spacer
- dc headers
- 15% window tint
eventually i want to go FI and get the GTM twin turbo kit but that wont be for a while. thanks for the input in advance
#254
CLUB MODERATOR
iTrader: (24)
just my 2 cents.. DEFINITELY the ztube and you might wanna add a JWT pop charger to that.. I have the spacer too.. I don't think it gets too cold in NM does it? so you might not need the IsoThermal.. Save some duckets there.. I have the 1/2" motordyne spacer myself...
I also have the TSW Cadwells.. (kuddos on going for different rims than the norms)
I think I've heard the mrevs don't help on AT transmissions.. I could be completely wrong..
You'll love that 15% tint.. I have that on the rear too.. nice and dark..
I also have the TSW Cadwells.. (kuddos on going for different rims than the norms)
I think I've heard the mrevs don't help on AT transmissions.. I could be completely wrong..
You'll love that 15% tint.. I have that on the rear too.. nice and dark..
#255
Registered User
iTrader: (10)
ok i have had my G for almost two years now all stock. the time has come to start modding. here is a list of what i want to do. i need some input on if these are good to do or just a waste of time. i know a little about cars but not a lot so thats why im asking. im open to any suggestions
- bassani exhaust
- z tube
- hks hipermax ls+ coilovers
- a set of TWS jarama rims 20x10rear & 20x8.5front
- motordyne mrev2 manifold
- motordyn copper iso thermal plenum spacer
- dc headers
- 15% window tint
it can get. Get the MotorDyne 5/16" spacer ISO, along with the other mods listed you'll realize some extra HP and sweet sound. You might want to reconsider the TWS 20" wheels, they'll weigh twice what you OEM wheels do which will hurt performance along with putting stress on brakes and suspension parts. Do a SEARCH under wheels and find the lightest wheels available if you're into performance.
Gary