ARC V1 Oil Catch Can Install and questions.....
#1
ARC V1 Oil Catch Can Install and questions.....
Not sure where to ask my questions but got a arc occ v1 and has a drilled hole where I assume is a breather valve... first of all is this compati my my revup?
Should I tig weld a small plate to cover the hole?? Forgive me learning my engine so u can call me a newb... I just need advice...???
Should I tig weld a small plate to cover the hole?? Forgive me learning my engine so u can call me a newb... I just need advice...???
#2
Update**** sent to the welding shop to cover hole in the top!!! My initial understanding of the tank is that it hooks up to the plenum from the side... the top opening is the breather opening... I seen people route a tube to the ground from the tank so oil smell does not go in cabin... any input is muchly appreciated!!! Thanx!!
#3
#4
#5
#7
Hello Nightmare....=o(
What you have is so far off what you need the only smart solution is to buy the correct catch can and sell what you have. Google "Catch Cans" you can see both the inlet/outlet are on top and that's removeable so it can be emptied. I'm running a C6 Vette catch can and it works great....Gary
Trending Topics
#9
Glad this is your nightmare, not mine!
I just did a 20 minute search, no one makes a vented catch can for our VQ motors including ARC! Where did you buy this from, is it possible they sent you the wrong can?You need find out from where you purchased this can from why they sent you the wrong one....Gary
#10
Go on my350z theres plenty of people using these gary??? I bought this right here on driver... im not sure if its vented but I know aam used to mod these to fit fi set ups.... its a arc v1 oil catch can... its official had a nice decal on it but making another one and then polishing it all up either for use or fs...
#11
This one right?
You probably saw this but just in case
http://my350z.com/forum/engine-and-d...plug-size.html
You probably saw this but just in case
http://my350z.com/forum/engine-and-d...plug-size.html
Last edited by VQ Johnny; 02-22-2013 at 11:57 AM.