Debagded.. need help Rebadging..
#1
Debagded.. need help Rebadging..
I removed the I N F I N I T I and G 3 5 emblems from my car today and I need some help as what I should do. I ordered the large 350 GT emblem a few weeks ago and decided to put it on later today. I know theres adhesive stuck to it but im not sure how to put it on. Do I just peel off the tape thats over it and press it hard on the car or do I need to do something to prep it? I think the car looks look good with just the Mt. Fuji emblem but they 350GT will look nice since its red.
#6
Just wipe down the area you're going to adhere with some dilluted dishsoap.
dry completely, put some masking tape around the perimeter of where you're going
to attach to make your aim easier (use a balance if needed). If your garage is
less than 70F, use a heat gun/hair dryer to get the adhesive and trunk lid
nice and warm, then attach onto the car. Keep dry for 24 hours, then wax
afterwards.
dry completely, put some masking tape around the perimeter of where you're going
to attach to make your aim easier (use a balance if needed). If your garage is
less than 70F, use a heat gun/hair dryer to get the adhesive and trunk lid
nice and warm, then attach onto the car. Keep dry for 24 hours, then wax
afterwards.
#7
Trending Topics
#8
#11
#12
#13
Registered User
iTrader: (1)
Join Date: Dec 2004
Location: Texas Gulf Coast
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NiteOwl
Thanks Wil - have a heat gun, will use...I think the symbol on the back is enourmass - something Flavor Flav might wear around his neck...
#15