Computer-cut Tint?
Computer-cut Tint?
Has anyone been able to find a tint dealer online that sells computer-cut tint? I cannot seem to find anyone that has the templates for our G35's... I have used computer-cut tint in the past on a few other vehicles and I loved it!
Thanks
Frank-
http://www.adrenalinepump.com
Thanks
Frank-
http://www.adrenalinepump.com
Re: Computer-cut Tint?
its tint pre-cut with a plot cutter for exact fit on the windows in your car..
http://www.adrenalinepump.com
http://www.adrenalinepump.com
Re: Computer-cut Tint?
straighter edges and exact fit. easier installation.
when you use bulk tint from a roll, the edges are cut after the tint is on the window using the window edge as a guide. edges end up relatively straight, but not perfect straight. at least this is what we did 15+ years ago.
'03.5 Sedan, Silver/Black, Leather, Sport
when you use bulk tint from a roll, the edges are cut after the tint is on the window using the window edge as a guide. edges end up relatively straight, but not perfect straight. at least this is what we did 15+ years ago.
'03.5 Sedan, Silver/Black, Leather, Sport
Re: Computer-cut Tint?
oh thats cool..
one thing i never understood about tint
the bottom of the window.. where the /\ thing is which the glass is in the middle of.. /(glass)\ on the door.. how do you get the tint down inside of that?!? and how far down does the tint go?
..
pestilence
..
one thing i never understood about tint

the bottom of the window.. where the /\ thing is which the glass is in the middle of.. /(glass)\ on the door.. how do you get the tint down inside of that?!? and how far down does the tint go?
..
pestilence
..
Re: Computer-cut Tint?
Depends on the install pesti. If they take your door panels off, it can go down quite far. If they don't, they'll usually just tape the rubber back and cut the tint to go down 1/2 to 1" or so.
Trending Topics
Re: Computer-cut Tint?
The way that you get the tint down in there is that you use a plastic tool (something like a old credit card) and press it down into the door so that the gasket is pressing against the window. That way there is an extra 1/4 -1/2 inch of space to apply the tint. and you don't have to take the door apart! Let it dry a day or three. wind the window down and when the window goes back up it will flip that rubber back up with it..voila!! A trick from the old trade...
Re: Computer-cut Tint?
Its actually a beautiful thing - Pre-Cut Tint.... So easy to do and the results are way better then any shop can do. I had found a guy on the internet that did it and I bought many kits off of him a few years back but I cant find him anymore :-( ... Even the rear window comes in one perfect cut piece..
http://www.adrenalinepump.com
http://www.adrenalinepump.com
Thread
Thread Starter
Forum
Replies
Last Post




