CuztomPartZ Aluminum Engine Undershroud Fits the Sedan! :)
#1
CuztomPartZ Aluminum Engine Undershroud Fits the Sedan! :)
Update:
Big sale going on right now:
http://zspeedperformance.com/Exterior-Body_c16.htm
So I have always wanted one of the ARC aluminum underpans for the G but never been willing to pay that kind of price. Unfortunately until now they were the only one who makes one. I've been through two of the stock plastic ones in the last few years. The holes rip open and it just gets beat to hell over time.
A friend sent me this link to a vendor over on my350 who has made a nice underpan for the 350Z and G coupe. I spoke to him and decided to try one out on my sedan for fitment.
http://my350z.com/forum/body-exterio...are-ready.html
It came in a couple weeks ago. I am very impressed with the build and material quality of this thing! I took it out for a test fit. It fits like a charm!
You will notice in a couple of the pics that there appears to be a bulge back near the oil pan. One of the bolts hits my oil pan and I need to get a shorter bolt. This is because I have the AAM oil pan spacer AND the Greddy oil pan. With one or the other (or stock) this would fit fine.
I'm very happy with it. This is one purchase well worth the money!
Next time my car is on a lift I'll get better pics too.
Unpacking:
Oil pan door:
Installed:
Other pics from the other thread:
You can also get it PC'd in black.
Big sale going on right now:
http://zspeedperformance.com/Exterior-Body_c16.htm
So I have always wanted one of the ARC aluminum underpans for the G but never been willing to pay that kind of price. Unfortunately until now they were the only one who makes one. I've been through two of the stock plastic ones in the last few years. The holes rip open and it just gets beat to hell over time.
A friend sent me this link to a vendor over on my350 who has made a nice underpan for the 350Z and G coupe. I spoke to him and decided to try one out on my sedan for fitment.
http://my350z.com/forum/body-exterio...are-ready.html
It came in a couple weeks ago. I am very impressed with the build and material quality of this thing! I took it out for a test fit. It fits like a charm!
You will notice in a couple of the pics that there appears to be a bulge back near the oil pan. One of the bolts hits my oil pan and I need to get a shorter bolt. This is because I have the AAM oil pan spacer AND the Greddy oil pan. With one or the other (or stock) this would fit fine.
I'm very happy with it. This is one purchase well worth the money!
Next time my car is on a lift I'll get better pics too.
Unpacking:
Oil pan door:
Installed:
Other pics from the other thread:
You can also get it PC'd in black.
Last edited by ttrank; 09-10-2010 at 09:42 AM.
#6
#7
Trending Topics
#8
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,299
Received 1,487 Likes
on
1,222 Posts
G35 sedan w/ too much money in mods
#9
#10
The X is a totally different pan and will not fit.
The oil fitler is in a different spot, The pan is totally different on the rear part where the transfer case is also as the subframe design is different.
The front short part does fit thou
The oil fitler is in a different spot, The pan is totally different on the rear part where the transfer case is also as the subframe design is different.
The front short part does fit thou
#11
#12
I was just looking to the pic you posted and thinking to myself "That's not where my oil filter is?"
Damn, i was kinda hoping it would fit an X as taking the cover off each OC is getting to be a little PITA. I could have the change done in 10 mins if i had a cover with a window like this.
I don't want to cut my stock cover up, honestly...i could care less if the cover was plastic. Maybe i'll just make something up...but i hate hacking like that.
#15