Random Little Question Thread
That is Flying Lumpia. That shot was taken by Calvin during our Ultimate G35 Sedan Photoshoot in 2009. His car is DP.
I know those wheels are discontinued and a bit difficult to find. What are the closest wheels to those? VSXX?
) as I can't seem to get it blink at normal speed when the lights are on...regardless if I add a load resistor.
I guess it's the lighting. The pics I've seen taken by Flying Lumpia look like the car is a different color. Regardless, ridiculously clean and perfect stance IMHO. I wonder what he was dropped on during that picture.
I know those wheels are discontinued and a bit difficult to find. What are the closest wheels to those? VSXX?
I know those wheels are discontinued and a bit difficult to find. What are the closest wheels to those? VSXX?
VSXX looks close to me, i dont see silver much tho, the gold ones and burning black are more common.
Yes that is my car. In that pic I am on bc racing, the spring were not swift at that time but were 12k from bc. As for the wheels yes they are algernon intelesse 19x9 +32 and 19x10 +32 but I had a 10mm spacer in the pics. Also it could have came down in the back alittle more that day.
You can find those wheel on a site called Memory fab or vr motorsports. They buy and sell rare wheel. They wont have the offset the same as mine. Here is a set Memory fab is selling.
http://www.memoryfab.com/wheels/used/20100624165009
But they are 19x8 and 19x9.5 +44 and +45 kind of week.
and at vr wheels they have these which are the same color in my pic (i have change the color)

again the spec are pretty weak if you want to run a semi aggressive set up.
You can find those wheel on a site called Memory fab or vr motorsports. They buy and sell rare wheel. They wont have the offset the same as mine. Here is a set Memory fab is selling.
http://www.memoryfab.com/wheels/used/20100624165009
But they are 19x8 and 19x9.5 +44 and +45 kind of week.
and at vr wheels they have these which are the same color in my pic (i have change the color)
again the spec are pretty weak if you want to run a semi aggressive set up.
How many times can/should you unmount/remount wheels using the same tires. I have had 3 sets of wheels on the same tires and looking at number 4. I really dont want to screw mine tires up a I have alot of tread life left.
I've flipped many tires around mainly cause of camber just to even them out back and fourth and never thought twice
^Check the marketplace. They pop up from time to time.
I've all seen them on eBay.
You could also watch around the forum for any 03/04's upgrading bumpers and PM them about selling their old one.
I've all seen them on eBay.
You could also watch around the forum for any 03/04's upgrading bumpers and PM them about selling their old one.
Nail'd it.
I have these right now:

The beam dispersion is 100% perfect, I just don't want the yellow cast in the sunlight.
I'm afraid switching to LEDs will make throw off the beam pattern since I have them behind projectors.
Right now it's all nice and perfectly even because all the light is coming from one filament, instead of a cluster of smaller light sources.
Make sense now?
The other question I had...
If I change my rear indicators to LED but the fronts are still incandescent, will I still need load resistors?
I have these right now:

The beam dispersion is 100% perfect, I just don't want the yellow cast in the sunlight.
I'm afraid switching to LEDs will make throw off the beam pattern since I have them behind projectors.
Right now it's all nice and perfectly even because all the light is coming from one filament, instead of a cluster of smaller light sources.
Make sense now?
The other question I had...
If I change my rear indicators to LED but the fronts are still incandescent, will I still need load resistors?
If you are interested in the part number, let me know - I have the original box in my garage... or someone else might already know the part number (Chris, Marcus, or ?)
As for resistor in the rear = yes afaik
^Thanks Mike.
I think I'm going to get the ones from Autolumination that I posted.
They're like the PIAA's in that they're silver finish but illuminate amber. But they're only $3.50/ea.
If they're good, I've saved some money. If they're crap, I didn't lose that much.
I think I'm going to get the ones from Autolumination that I posted.
They're like the PIAA's in that they're silver finish but illuminate amber. But they're only $3.50/ea.
If they're good, I've saved some money. If they're crap, I didn't lose that much.








