debadging
#1
debadging
ok, so i heated up the emblem with a blow dryer for about 5 mins, removed the emblem and then proceeded to keep blow drying the left over adhesive. i got off as much with my thumb as i could and then started to use wd 40 and a rag to rub the rest off. my question is, i can still see the g35x shadow still there, how do i get rid of this?
#5
#7
Trending Topics
#14
OP
1. Acquire Meguairs Scratch X 2.0
2. Acquire Applicator pads(they sell 2 packs at advance or Autozone)
3. Clean the trunk, so no dirt on it
4. Apply a dot like half a penny size onto the applicator pad
5. Apply some pressure and Work it in, Work on the first "I and N" do not do all the letters at the same time.
6. After working it in(will probably take longer then the video below), Use a microfiber cloth and use car soap and water(to clean off the polishing oils) or 50/50 IPA wipe (50% water and 50% Isopropyl Alcohol mixed in a spray bottle) you do not want to keep the Polish on the paint for the sun to dry it..ect
7. Inspect your work on the first Two letters. If it looks good continue to the next two letters.
1. Acquire Meguairs Scratch X 2.0
2. Acquire Applicator pads(they sell 2 packs at advance or Autozone)
3. Clean the trunk, so no dirt on it
4. Apply a dot like half a penny size onto the applicator pad
5. Apply some pressure and Work it in, Work on the first "I and N" do not do all the letters at the same time.
6. After working it in(will probably take longer then the video below), Use a microfiber cloth and use car soap and water(to clean off the polishing oils) or 50/50 IPA wipe (50% water and 50% Isopropyl Alcohol mixed in a spray bottle) you do not want to keep the Polish on the paint for the sun to dry it..ect
7. Inspect your work on the first Two letters. If it looks good continue to the next two letters.
Last edited by thescreensavers; 08-22-2011 at 03:11 AM.