04 G35x Wheel bearings !
#1
#3
#4
Yes, they are OEM manufactured bearings (NTN) distributed by Timken and are bearings only. You need to purchase the hub and press them together.
There was an ebay seller selling them together for a while.
Have a read.
https://g35driver.com/forums/brakes-...-bearings.html
EDIT:
Ebay link $199 + $18 S/H
http://www.ebay.com/itm/04-05-06-inf...267631&vxp=mtr
Last edited by Mustang5L5; 12-20-2012 at 12:48 PM.
#6
#7
22MM socket + breaker bar + pipe over the end.
If you turn the wheels to either side, you can get the clearance to put a little torque into the pipe.
If you have a 22mm wrench, put the closed end on the bolt, and then use another wrench with a little mass and hit the end of the wrench. You don't need to go crazy, but the act of quick, sharp impacts can usually break the bolt loose like an impact gun.
Usually when i need to break a bolt loose, i can suceed by using 2 wrenchs. One is the closed end over the bolt, and the other wrench to hit the wrench in the loosen direction.
I have never needed an impact gun using that method.
The following users liked this post:
ccc123pm (12-20-2012)
Trending Topics
#9
The following users liked this post:
MikeDG (12-20-2012)
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM