New owner- how to I get the analog clock backlight on? Brake vibration?
#16
#17
There is some good reading on brake warp here:
http://www.stoptech.com/tech_info/wp...akedisk.shtml#
http://www.stoptech.com/tech_info/wp...akedisk.shtml#
#18
#20
Join Date: Mar 2008
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I confirmed they (the clock and the ring around the navigation controller dial) do light up when it's dark and the auto-lights go on. However, in the daytime when I turned the lights fully on manually, I could not tell they were on at all becuase of the sunlight. I'd think they'd glow brighter like the dash gauge cluster. Oh well, might be better next week when I get tint.
I def. feel the brakes are strange and will take back to the dealer- think I might have warped rotors or something. Vibration noticeable on almost all stops or even slowing down from say 35-20, so that's not right.
If I'm taking it in, do you know if there are any dealer service level adjustments (electronic or mechanical) they can do to reduce power steering assist? I feel like I'd like it to be a little "tighter" but didn't know if anything can be done about that? I'm sure I'll get used to it. Loving the car overall!
I def. feel the brakes are strange and will take back to the dealer- think I might have warped rotors or something. Vibration noticeable on almost all stops or even slowing down from say 35-20, so that's not right.
If I'm taking it in, do you know if there are any dealer service level adjustments (electronic or mechanical) they can do to reduce power steering assist? I feel like I'd like it to be a little "tighter" but didn't know if anything can be done about that? I'm sure I'll get used to it. Loving the car overall!
#21
Originally Posted by owls94
Unfortunately, my car also had the steering wheel "shake" while braking at high speeds. I took it in to the dealer and they replaced the rotors. I thought it was just me, but I guess it's a little more common. Other than this minor setback, the car is great and a blast to drive.
The rotors were a big enough problem on the 5th gen Maximas that Nissan issued a TSB on them. I hope I don't have the same issues with the G.
#22
Originally Posted by MoCoG
The rotors were a big enough problem on the 5th gen Maximas that Nissan issued a TSB on them. I hope I don't have the same issues with the G.
#23
Originally Posted by G35Now!
I had a 2k3 Max, and sure enough the rotors were pretty lame. In the G though, have never had a problem even during the track day - no brake fade, no shudder. Maybe it's a batch quality control thing?
#24
Same Problem - new post
can any of you guys weigh in? i just posted yesterday.
https://g35driver.com/forums/g35-sedan-v36-2007-08/221003-3-series-new-08-g35x-brakes-not-smooth.html
https://g35driver.com/forums/g35-sedan-v36-2007-08/221003-3-series-new-08-g35x-brakes-not-smooth.html
Thread
Thread Starter
Forum
Replies
Last Post
2007, analog, background, backlight, backlighting, clock, clockface, controller, g35, knob, light, sedan, steering, stopped, wheel