Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#3093
#3094
The following users liked this post:
jimmyboi860 (03-29-2012)
#3097
Work T1S
19x9+25 front, tires = 225/35/19
19x10.5+30 rear, tires = 255/35/19
Planning on getting 25mm spacers for the front and 30mm for the rear. Will the wheels sit flush after the spacers or will it still tuck on a coupe? Planning to go as low as i can on with the coils after putting the works on. I wanna figure this out before driving 3 hours away to pick them up.
Thanks in advance.
19x9+25 front, tires = 225/35/19
19x10.5+30 rear, tires = 255/35/19
Planning on getting 25mm spacers for the front and 30mm for the rear. Will the wheels sit flush after the spacers or will it still tuck on a coupe? Planning to go as low as i can on with the coils after putting the works on. I wanna figure this out before driving 3 hours away to pick them up.
Thanks in advance.
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#3098
Stretch
ok guys. i am getting the XXR 526 Chromium black in 20x9 front and 20x11 rear. I want to stretch my tires like so...![Name: DSCN1196.jpg
Views: 196
Size: 104.0 KB](https://g35driver.com/forums/attachments/wheels-tires/237375d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-dscn1196.jpg)
What size should i get to get this affect?
by that i mean where you can see the lip from the wheel from the rear of the car like in this pic.
My idea was to go with 225/30/20 front
255/30/20 rear
![Name: DSCN1196.jpg
Views: 196
Size: 104.0 KB](https://g35driver.com/forums/attachments/wheels-tires/237375d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-dscn1196.jpg)
What size should i get to get this affect?
by that i mean where you can see the lip from the wheel from the rear of the car like in this pic.
My idea was to go with 225/30/20 front
255/30/20 rear
#3099
#3102
Why is this happening???
OK I finally got my car lowered and after the alignment this is what I have encountered:
My passenger front wheel is pretty flush with the fender, but my driver front wheel sticks out more by about 1/2''. I have SPC camber arms that replaced OEM. What could cause this?
See pictures below.
![Name: 03271951.jpg
Views: 134
Size: 88.8 KB](https://g35driver.com/forums/attachments/wheels-tires/237377d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-03271951.jpg)
![Name: 03271952.jpg
Views: 139
Size: 95.4 KB](https://g35driver.com/forums/attachments/wheels-tires/237378d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-03271952.jpg)
I thought maybe it was because I didn't have an even drop, but even after adjusting my suspension to EXACT specs, it looks like this.
My passenger front wheel is pretty flush with the fender, but my driver front wheel sticks out more by about 1/2''. I have SPC camber arms that replaced OEM. What could cause this?
See pictures below.
![Name: 03271951.jpg
Views: 134
Size: 88.8 KB](https://g35driver.com/forums/attachments/wheels-tires/237377d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-03271951.jpg)
![Name: 03271952.jpg
Views: 139
Size: 95.4 KB](https://g35driver.com/forums/attachments/wheels-tires/237378d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-03271952.jpg)
I thought maybe it was because I didn't have an even drop, but even after adjusting my suspension to EXACT specs, it looks like this.
![Name: 03271947.jpg
Views: 124
Size: 98.6 KB](https://g35driver.com/forums/attachments/wheels-tires/237379d1501885145-have-question-s-about-wheels-tires-offsets-camber-etc-ask-here-03271947.jpg)
#3103
I have the same setup as you(SPC). did you make sure when you did the drop or the install that the piece under the joint is the same as on the other side. In this pic it would be the piece on top of that red ball, but under the top of it.it is a gold piece, that you can turn to get negative and positive adjustment's in your front camber. The problem may be that that is as far as they could go on the alignment rack. Make sure that, that gold piece is in the same position as the other one. Sorry for the confusing explanation.
![](http://www.myg37.com/forums/attachments/brakes-and-suspension/79753d1226954307-spc-front-camber-kit-g37-coupe-sema-pre-release-dscn9425_5.jpg)
#3104
#3105
On a 04 Sedan, how would 19x9.5 +30 all around fit? Assuming I drop and have camber kits, is there a need to modify fenders? If so which ones? Would 9.5 front look odd in the front in the first place? Looking to keep negative camber as close to stock as possible.
Last edited by dominate; 04-01-2012 at 06:09 PM.