Specs?

 

I have a 05 g35 sedan lowered. I was wondering if I can fit 20x10.5 + 22 in the front and back without any Fendor work. Opinions would be much appreciated

Thanks

 

Don't know about that, but I found I could mount 19" X 8" +30 with 245 40 19 tires and it gave perfect flush fit WITHOUT rolling the fenders.

BTW: it did not change my speedo

 

I have a 40 hole step lips/barrels and wanted to know what wheel faces fit barrels that came off of Ordens?

 

I have an '05 X, and I was wondering if the OEM '03 350Z 18" wheel with 30mm offset with 235/45/18 will fit without any problems. My suspension is completely stock right now, but i'm looking into BC coilovers too, will that effect anything in the future?

 

I have a 05x sedan and just picked up some 18x8.5 wheels with some 235/45/18 tires. Being that they're +50 I know I'll have to pick up at least 5mm spacers for the fronts to clear. My question is what spacers will get me pretty close to flush? I do plan on lowering, but only to maybe 1-2 finger gap between tire and fender. Would I be okay with 15mm spacers all around? I'm not looking to have them stick out past the fenders. Also my fenders aren't rolled/pulled if it matters.

 

15mm should do it.

 

I have an 05 G35 coupe 6mt with the stock 19's. I'm looking to get VMR V710's and was looking at 19x8.5 ET 35 in the front and 19x9.5 ET 22 in the rear. Would this settup fit with coilovers, without the use of wheel spacers and without having to roll my fenders? Also I'm not sure about tire specs to fit these wheels. I was thinking 255 in the rear and 235 or 245 in the front. Would this work??? Also would these clear the brakes.

 

I have an 04x looking at picking up a squared setup of 19x10+35 I'll be running a 255/35/19 and I'm lowered on Megan coils. Are the fronts going to fit? How sunk are these going to be?

 

Shane here is one for you.....

 

When putting 2nd gen wheels on a 1st gen is it only the g37 19's that you have to use the G37 lugs for, or does it apply to all 2nd gen wheels when going on a 1st gen?

 

I have an 05 G35 coupe 6mt with the stock 19's. I'm looking to get VMR V710's and was looking at 19x8.5 ET 35 in the front and 19x9.5 ET 22 in the rear. Would this settup fit with coilovers, without having to roll my fenders? Also I'm not sure about tire specs to fit these wheels. I was thinking 255 in the rear and 235 in the front. Would this work??? Also would these clear the brakes.

 

Your should be fine, you shouldn't have to roll fenders and it should clear the brakes. But won't be flush especially if your low

 

Those will be pretty weak offsets on a coupe. check around there are a dozens of threads already devoted to this info...

 

@LilLB88:

i don't have brembos on my 06 coupe, so i can't speak for brake clearing on your 05.

but for fender, the VMRs should fit fine. i have similar specs in the rear and i'm lowered as well.

the tire combos for those rims can be 245/35/19 and 275/35/19 for a wider look. Or 235/35/19 and 255/35/19. And even the OEM sizes 225/40/19 and 245/40/19 can be stretched to fit 8.5 and 9.5 width.