Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
Registered User
iTrader: (18)
Joined: Sep 2007
Posts: 10,359
Likes: 1,939
From: Auckland, New Zealand
Around $250 each from VR.
is American Rim the same as that other place that sold the raw lips? if, so I calculated it and buying them there and having them polished would cost more.
is American Rim the same as that other place that sold the raw lips? if, so I calculated it and buying them there and having them polished would cost more.
Registered User
iTrader: (18)
Joined: Sep 2007
Posts: 10,359
Likes: 1,939
From: Auckland, New Zealand
My other question about those barrels is are they already pre-drilled for my wheels?
if not, then that's polishing and drilling on top of the cost of the actual barrel.
if not, then that's polishing and drilling on top of the cost of the actual barrel.
Could be-- they are standard 40 hole, not sure equips sizing:
18" Diameter Reverse Lip / Rolled Flange Outer Halves:
Assembly Hole Pattern / Hole Sizing for M8 Bolts: 40 XØ8.5mm Equally Spaced.
1 Hole Slotted For Thru Center Valve.
Rim I.D. @ Bolt Flange: 17.675" / Bore: 15.915" /
Bolt Flange Thickness: 0.180" +0.010/-0"
18" Diameter Reverse Lip / Rolled Flange Outer Halves:
Assembly Hole Pattern / Hole Sizing for M8 Bolts: 40 XØ8.5mm Equally Spaced.
1 Hole Slotted For Thru Center Valve.
Rim I.D. @ Bolt Flange: 17.675" / Bore: 15.915" /
Bolt Flange Thickness: 0.180" +0.010/-0"
Registered User
Joined: Apr 2012
Posts: 11
Likes: 0
From: Mayport FL
im in the market of getting new wheels so the fitment for the front is 19x8.5 5-114.3 [+15mm] and the rear is 19x11 5-114.3 [+15mm] will these fit in the wheels wells without fender roll and lowered 1.5'', and is 8.5'' in the front and 11'' to much of a gap, and do i need to be aware of anything with such a aggressive wheel im about to buy? need response asap sitting in my shopping cart.
That is the size of the wheel on the back of my coupe now that the previous owner had put on. But he bent 3 of the 4 rims so I have to get new ones. I like the look of it now I'm just wondering what kind of room there is too play with and what others have put.
someone want to bless me some wheel knowledge?
Looking at a set of 18 Work VS XX 3 Piece wheels. The specs are:
Front
18x8.5 +35
Rear
18x10.5 +22
The front offset scares me for reason, is it possible to get that sitting right with spacers? Also is it possible to fit 305's on the rear?
Looking at a set of 18 Work VS XX 3 Piece wheels. The specs are:
Front
18x8.5 +35
Rear
18x10.5 +22
The front offset scares me for reason, is it possible to get that sitting right with spacers? Also is it possible to fit 305's on the rear?
