Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#1415
Got some wheels that are 19x8.5 +25 F and 19x10.5 +32 R. Not lowered at the moment and probably wont be for a while. What size spacers should I get for a somewhat flush fitment? I was thinking a 15MM F and 5-10MM R. Plan on having a 245-35 front and 275-35 rears. Thanks for the help.
#1416
Wanted to know if anyone had experience with Auto Couture wheels as far as the disk fitment. I'm looking at a set of 19x10f/12r, offset +10f +4r and the fronts are high disk, rears standard. I searched around but didn't find many people running the wheels (except the one red G coupe on here with them). I was wondering if anyone knew if those disk sizes cleared factory Brembos on a coupe.
TIA
TIA
#1417
I am wondering if this set-up will fit without issue.
05 Sedan with G/Z springs and Tokico shocks
19x9 + 35 front. 245/35/19
19x10 +45 Rear. 285/30/19
After looking at more set-up than I can count, and calculating tire diameters for almost every combo possible ive come up with the above tire combo.
I am not worried about the front, but I am uncertain about the rear fitting without rubbing. My fenders are not rolled as of right now, but im probably going to roll them a little (no pulling though).
Or I guess I should ask "what will it take for the rear to fit"
Im looking at Hankook v12's for tires.
Thanks.
05 Sedan with G/Z springs and Tokico shocks
19x9 + 35 front. 245/35/19
19x10 +45 Rear. 285/30/19
After looking at more set-up than I can count, and calculating tire diameters for almost every combo possible ive come up with the above tire combo.
I am not worried about the front, but I am uncertain about the rear fitting without rubbing. My fenders are not rolled as of right now, but im probably going to roll them a little (no pulling though).
Or I guess I should ask "what will it take for the rear to fit"
Im looking at Hankook v12's for tires.
Thanks.
#1418
So I really don't have time to go through 95 pages, so hopefully this hasn't been answered before... tried searching but couldn't find anything. The only thing I found said 20mm front and 25 mm rear... but that was someone with a 350z and anothers guess.
What I want is for the oem 18's to be as flush as possible with stock ride height and not have to worry about rubbing at all even under severe cornering. Which size spacers would you recommend?
What I want is for the oem 18's to be as flush as possible with stock ride height and not have to worry about rubbing at all even under severe cornering. Which size spacers would you recommend?
#1419
Looking for some advice on tire size for my G35 Coupe. I just got in my new wheels they are:
19x10 +10
19x11 +5
I was planning on using Falken FK452's but if someones got a better tire option I'm open, I need a mild to medium stretch. I was thinking about going with these specs but wanted to run it by everyone first so I only end up ordering tires once. My rear fenders are rolled and I'm on Stance Coilovers
Fronts:
245/35-19 or 255/35-19
Rears:
275/35-19
Any advice would be appreciated
19x10 +10
19x11 +5
I was planning on using Falken FK452's but if someones got a better tire option I'm open, I need a mild to medium stretch. I was thinking about going with these specs but wanted to run it by everyone first so I only end up ordering tires once. My rear fenders are rolled and I'm on Stance Coilovers
Fronts:
245/35-19 or 255/35-19
Rears:
275/35-19
Any advice would be appreciated
#1420
OEM 19" Factory g37 rims
Maybe I'm not using the search correctly, but i couldn't find the answer to my question. Can somebody tell me if OEM 19" Infiniti G37 rims factory, made by Enkei, Two front rims are 19x8.5 with offset 43. The rear rims are 19x9 with offset 45. will they fit my 2007 Sedan G35x ?
#1421
RIM QUESTION!!!!
Lost some rivets for my rim... well the shop did while fixing the curb rash!
Im only missing 2 out of 10 but these aren't plastic these actually left holes in the rims!
I took them off and put my 18s on for now. My question is are they still safe to drive on? The shop guy said yes since its only 2 missing but he was kind of shady!
They didn't even charge me after I noticed they were missing.
Also can I replace em??? Anyone know how/where? Thanks
Lost some rivets for my rim... well the shop did while fixing the curb rash!
Im only missing 2 out of 10 but these aren't plastic these actually left holes in the rims!
I took them off and put my 18s on for now. My question is are they still safe to drive on? The shop guy said yes since its only 2 missing but he was kind of shady!
They didn't even charge me after I noticed they were missing.
Also can I replace em??? Anyone know how/where? Thanks
#1423
Registered User
iTrader: (16)
I am wondering if this set-up will fit without issue.
05 Sedan with G/Z springs and Tokico shocks
19x9 + 35 front. 245/35/19
19x10 +45 Rear. 285/30/19
After looking at more set-up than I can count, and calculating tire diameters for almost every combo possible ive come up with the above tire combo.
I am not worried about the front, but I am uncertain about the rear fitting without rubbing. My fenders are not rolled as of right now, but im probably going to roll them a little (no pulling though).
Or I guess I should ask "what will it take for the rear to fit"
Im looking at Hankook v12's for tires.
Thanks.
05 Sedan with G/Z springs and Tokico shocks
19x9 + 35 front. 245/35/19
19x10 +45 Rear. 285/30/19
After looking at more set-up than I can count, and calculating tire diameters for almost every combo possible ive come up with the above tire combo.
I am not worried about the front, but I am uncertain about the rear fitting without rubbing. My fenders are not rolled as of right now, but im probably going to roll them a little (no pulling though).
Or I guess I should ask "what will it take for the rear to fit"
Im looking at Hankook v12's for tires.
Thanks.
#1424
Registered User
iTrader: (16)
looking for some advice on tire size for my g35 coupe. I just got in my new wheels they are:
19x10 +10
19x11 +5
i was planning on using falken fk452's but if someones got a better tire option i'm open, i need a mild to medium stretch. I was thinking about going with these specs but wanted to run it by everyone first so i only end up ordering tires once. My rear fenders are rolled and i'm on stance coilovers
fronts:
245/35-19 or 255/35-19
rears:
275/35-19
any advice would be appreciated
19x10 +10
19x11 +5
i was planning on using falken fk452's but if someones got a better tire option i'm open, i need a mild to medium stretch. I was thinking about going with these specs but wanted to run it by everyone first so i only end up ordering tires once. My rear fenders are rolled and i'm on stance coilovers
fronts:
245/35-19 or 255/35-19
rears:
275/35-19
any advice would be appreciated
245 & 265
#1425
Registered User
iTrader: (16)
Maybe I'm not using the search correctly, but i couldn't find the answer to my question. Can somebody tell me if OEM 19" Infiniti G37 rims factory, made by Enkei, Two front rims are 19x8.5 with offset 43. The rear rims are 19x9 with offset 45. will they fit my 2007 Sedan G35x ?