Originally Posted by GOAT35

RIM QUESTION!!!!
Lost some rivets for my rim... well the shop did while fixing the curb rash!
Im only missing 2 out of 10 but these aren't plastic these actually left holes in the rims!
I took them off and put my 18s on for now. My question is are they still safe to drive on? The shop guy said yes since its only 2 missing but he was kind of shady!
They didn't even charge me after I noticed they were missing.
Also can I replace em??? Anyone know how/where? Thanks

Originally Posted by Pepper

No problems fitting them.

Originally Posted by Pepper

245 & 265

Originally Posted by Pepper

I'm not a sedan guy but I'm almost positive that the rear will have to be rolled.

Originally Posted by hamzafraj

Hi everybody, my wheel set up is 20x9 +22 w/ 245/35 front tires and 20x10.5 + 35 w/ 285/30 rear tires.

My goal now is to make it look more aggressive, to do that I need you guys's input.

1) what coil-overs would you recommend, one that keep the ride smooth enough?
2) I'm not sure yet about spacers but I welcome any suggestions
3) how low should I lower it in order to look aggressive, well balanced and flash with fenders?


Thanks

Originally Posted by or_G

With a stock sports suspension drop.. What tire sizes would be good for staggered 18x10,11.5 and 20x8.5,10 ?

Coupe

anyone???

Originally Posted by hamzafraj

Hi everybody, my wheel set up is 20x9 +22 w/ 245/35 front tires and 20x10.5 + 35 w/ 285/30 rear tires.

My goal now is to make it look more aggressive, to do that I need you guys's input.

1) what coil-overs would you recommend, one that keep the ride smooth enough?
2) I'm not sure yet about spacers but I welcome any suggestions
3) how low should I lower it in order to look aggressive, well balanced and flash with fenders?

Thanks

Originally Posted by or_G

With a stock sports suspension drop.. What tire sizes would be good for staggered 18x10,11.5 and 20x8.5,10 ?

Coupe

anyone???

Originally Posted by Pepper

Try contacting the wheel manufacturer or a retailer that carries that brand.

Originally Posted by 4DGS

Not gonna lie man, I don't think those rivets are functional, there is NO modular wheels that only use 10 bolts to hold the face in.

What kind of wheels are they?

Originally Posted by 4D05G35

I am wondering if this set-up will fit without issue.
05 Sedan with G/Z springs and Tokico shocks
19x9 + 35 front. 245/35/19
19x10 +45 Rear. 285/30/19
After looking at more set-up than I can count, and calculating tire diameters for almost every combo possible ive come up with the above tire combo.
I am not worried about the front, but I am uncertain about the rear fitting without rubbing. My fenders are not rolled as of right now, but im probably going to roll them a little (no pulling though).
Or I guess I should ask "what will it take for the rear to fit"
Im looking at Hankook v12's for tires.

Thanks.

Originally Posted by das stig

So I really don't have time to go through 95 pages, so hopefully this hasn't been answered before... tried searching but couldn't find anything. The only thing I found said 20mm front and 25 mm rear... but that was someone with a 350z and anothers guess.

What I want is for the oem 18's to be as flush as possible with stock ride height and not have to worry about rubbing at all even under severe cornering. Which size spacers would you recommend?

Originally Posted by skullnbones

Looking for some advice on tire size for my G35 Coupe. I just got in my new wheels they are:

19x10 +10
19x11 +5

I was planning on using Falken FK452's but if someones got a better tire option I'm open, I need a mild to medium stretch. I was thinking about going with these specs but wanted to run it by everyone first so I only end up ordering tires once. My rear fenders are rolled and I'm on Stance Coilovers

Fronts:
245/35-19 or 255/35-19

Rears:
275/35-19

Any advice would be appreciated

Originally Posted by 4DGS

You'll be fine with a roll on those.