Playstation Install Glove Box
#1
Playstation Install Glove Box
Hey can anyone tell me if they have installed a slim ps2 in their glove box? I hooked mine up but in reviewing the area where the wires run for the power cable and video it obviously doesn't sit flush so I can close the glove box. I was thinking about sawing out a hole in the back but when I feel how much space is between the glove box and a big piece of plastic is very small. Can anyone post up any pictures or tell me how you got yours to fit? Having to disconnect the cables is a pain in the a$$ and it looks ghetto.
#2
it can be done - i cant beleive i dont have pics of mine - but yes, you need to open a hole in the back of the glove. And not only the glove, but also the whole entire glove box. It wont close right fi you dont open a complete clearance for the cables.
I cant take pics of the hole, but if you like ill take a pic of where the cables are coming in from and the PS2 later today.
I cant take pics of the hole, but if you like ill take a pic of where the cables are coming in from and the PS2 later today.
#3
#4
#5
#6
yeh you need a big hole
i made about a 2"x1" rectangle inorder to get the ps2 to close with the remotes still connected. you can not shut it with a memory card connected though. there is no way to go about cutting anything either to make it work, i have tried. the only thing that i can think of is to get a shorty memory card, but i cant seem to finda one that sells a shorter one then the standard sony memory cards.
if you do a search for my kenwood ddx 7015 install you can see the ps2 beginning hole i had to make it bigger to get it to shut though with the controllers still connected.
i made about a 2"x1" rectangle inorder to get the ps2 to close with the remotes still connected. you can not shut it with a memory card connected though. there is no way to go about cutting anything either to make it work, i have tried. the only thing that i can think of is to get a shorty memory card, but i cant seem to finda one that sells a shorter one then the standard sony memory cards.
if you do a search for my kenwood ddx 7015 install you can see the ps2 beginning hole i had to make it bigger to get it to shut though with the controllers still connected.
#7
Trending Topics
#8
#10
I was able to cut 2 holes in the left rear corner of the upper glove compartment (one .5" round one for the power and a 1.5" x .5" rectangular one for the a/v plug). I can fully close the glove compartment with 2 controllers and memory card(s) plugged in. BTW, I found a DC power adapter for the PS2 so I didn't have to use a power invertor.
Last edited by k67p67; 06-28-2006 at 02:22 AM. Reason: Added pics
#12
#14