FINALLY! My DoubleDIN Conversion DIY Guide
Re: FINALLY! My DoubleDIN Conversion DIY Guide
When I get my coupe Im planning on just doing this:
https://g35driver.com/forums/showfla...sed&sb=5&part=
Dont see the point in spending 400 bucks when you can just cut it to size
But I also dont need a full DIN type structure, I just need the opening to flush mount a 7" LCD
https://g35driver.com/forums/showfla...sed&sb=5&part=
Dont see the point in spending 400 bucks when you can just cut it to size
But I also dont need a full DIN type structure, I just need the opening to flush mount a 7" LCD
Re: FINALLY! My DoubleDIN Conversion DIY Guide
So if you have that part for the double din... you can't use it with the stock A/C controllers
< aRTiFiCiaL iNTeLLiGeNCe iS nO MaTcH fOr NaTuRaL sTupiDiTy >
< aRTiFiCiaL iNTeLLiGeNCe iS nO MaTcH fOr NaTuRaL sTupiDiTy >
Re: FINALLY! My DoubleDIN Conversion DIY Guide
nope unless you buy the SWI-X unit from pac-audio.com then your steering wheel controls will continue working.
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/Z-Tube/double-din
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/Z-Tube/double-din
FINALLY! My DoubleDIN Conversion DIY Guide
Here you go fellas......
http://www.g-owners.com/article_read.asp?id=33
I would appreciate any feedback, constructive criticism, input, etc to make the guide better. Thanks.
docron1 a.k.a. joepaniolo
<P ID="edit"><FONT class="small"><EM>Edited by ramborami on 04/10/04 03:51 PM.</EM></FONT></P>
http://www.g-owners.com/article_read.asp?id=33
I would appreciate any feedback, constructive criticism, input, etc to make the guide better. Thanks.
docron1 a.k.a. joepaniolo
<P ID="edit"><FONT class="small"><EM>Edited by ramborami on 04/10/04 03:51 PM.</EM></FONT></P>
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM




