Wrathernaut's Double-Din Installation FAQ, Shopping and Resource List
#406
I just purchased everything i need to hook up my double din radio but the actual setup is so confusing is there a video showing you exactly how to wire up the aftermarket HU using the wire harnesses showing you what to conect to what??? BTW my car is a 2003 coupe with the Bose setup
#408
#413
#414
and there will most likely be 2 extra harnesses, one from your steering wheel controls for the stock HU, and one from your Navi(voice and mute signals to the stock HU)
umm... idk how urs is but the wires that you would connect to your ebrake(mine was pink) you should be able to tie in with your ground wire(black wire) and it should work. AFAIK the ebrake point you would wire it to becomes grounded when the ebrake is applies(also completes the circut for the ebrake light on your dash, making it light up)
#416
Yes it will work. There should be specific wiring instructions for bypassing the video with the module. I bought the PAC version of what you had and it works perfectly.
The following users liked this post:
Night (07-12-2011)
#417
This thread is epic!
I recently started ordering parts for my 06 6MT (with nav)... Unfortunately the JDM AC/Controller Trim piece is back-ordered for about 2 months now, and from what I understand, it's gonna be at least another month.
Here is my list of items purchased:
JDM AC Controller/Trim Piece
Alpine INA-W910
Dynamat Extreme 35 sq foot
Diamond Audio H600S components
Metra 70-7550 Radio Wiring Harness
Metra Axxess ASWC Universal Steering Wheel Control
Metra 40-NI10 Nissan Antnna Adapter
PAC TR7 Universal. Trigger Module
Sirius-Xm SVX100V1 Xm In-Car Tuner and Antenna
Power cable, battery terminals, fuses, speaker wire, rca's, etc.
Already owned:
(2) JL Audio 12W3V2
JL 500/1 Slash amp
JL 300/4 Slash amp
I'm still debating whether or not I want to build a box for both 12's or buy a new beastlier sub. If I buy a beastlier sub, I will most likely need another amp as 500 isn't going to cut it.
I plan on dynamating the entire truck and both doors. I may dynamat more depending on rattles and overall SQ. Anyone have issues with the rear view mirror rattling?
Can anyone think of anything I may be missing or suggestions for my setup?
My car is XM equipped with the factory equipment... Is it possible to use the factory installed XM Antenna or will I have to rerun the one included in the Sirius-Xm SVX100V1 Xm In-Car Tuner and Antenna package?
I recently started ordering parts for my 06 6MT (with nav)... Unfortunately the JDM AC/Controller Trim piece is back-ordered for about 2 months now, and from what I understand, it's gonna be at least another month.
Here is my list of items purchased:
JDM AC Controller/Trim Piece
Alpine INA-W910
Dynamat Extreme 35 sq foot
Diamond Audio H600S components
Metra 70-7550 Radio Wiring Harness
Metra Axxess ASWC Universal Steering Wheel Control
Metra 40-NI10 Nissan Antnna Adapter
PAC TR7 Universal. Trigger Module
Sirius-Xm SVX100V1 Xm In-Car Tuner and Antenna
Power cable, battery terminals, fuses, speaker wire, rca's, etc.
Already owned:
(2) JL Audio 12W3V2
JL 500/1 Slash amp
JL 300/4 Slash amp
I'm still debating whether or not I want to build a box for both 12's or buy a new beastlier sub. If I buy a beastlier sub, I will most likely need another amp as 500 isn't going to cut it.
I plan on dynamating the entire truck and both doors. I may dynamat more depending on rattles and overall SQ. Anyone have issues with the rear view mirror rattling?
Can anyone think of anything I may be missing or suggestions for my setup?
My car is XM equipped with the factory equipment... Is it possible to use the factory installed XM Antenna or will I have to rerun the one included in the Sirius-Xm SVX100V1 Xm In-Car Tuner and Antenna package?
Last edited by KnowScott; 07-12-2011 at 11:06 AM.
#418
i also followed wrathernauts bose wiring setup with the 70551 and grounded all 3 grounds but for the blue wire (amp turn on) there is no wire coming out of my alpine w407 to hook that up. are the bose amps powered even if this isnt hooked up. my speakers go kinda loud as is but even with the bassnturn all the way up there is slight/no bass..
#419
i also followed wrathernauts bose wiring setup with the 70551 and grounded all 3 grounds but for the blue wire (amp turn on) there is no wire coming out of my alpine w407 to hook that up. are the bose amps powered even if this isnt hooked up. my speakers go kinda loud as is but even with the bassnturn all the way up there is slight/no bass..